journal article·2011-01

Comparison of microstructures and tensile properties of pulse electrodeposited Ni on polycrystalline and amorphous substrates

Y. D. Zheng, P. Q. Dai, W. C. Xu, B. Wu

Materials Science and Technology· Volume 27· Issue 1
Publisher page

Abstract

Ultrafine grained nickel (UFG Ni) and microcrystalline nickel (MC Ni) were fabricated on two types of substrates, i.e. the amorphous (Ni–P) and polycrystalline (stainless steel) substrates by pulse electrodeposition without additives. This study demonstrates that when inhibiting the epitaxial growth by first depositing a thin amorphous layer on the polycrystalline substrates, the grain size of the subsequent Ni deposit decreases dramatically from microscale to the UFG regime, which depends on the deposition conditions. Compared with MC Ni, which has an ultimate tensile strength σUTS of 397 MPa and an elongation to failure εTEF of 11·98, UFG Ni with an average grain size of 120·72 nm exhibits an enhanced σUTS of 807 MPa and a comparable εTEF of 10·44. The electrodeposited method used in this study provides an effective and low cost way to produce UFG materials with both high strength and ductility, which can meet the demands for practical application as structural materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Microstructure and mechanical properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China

Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou 350108, China

References (13)

Show source-provided references
1. 10.1016/j.mser.2004.07.00110.1016/j.mser.2004.07.001 ↗
2. 10.1016/j.surfcoat.2007.08.02310.1016/j.surfcoat.2007.08.023 ↗
3. 10.1016/S0257-8972(03)00014-810.1016/S0257-8972(03)00014-8 ↗
4. 10.1016/S0257-8972(96)02928-310.1016/S0257-8972(96)02928-3 ↗
5. 10.1016/S0013-4686(03)00378-510.1016/S0013-4686(03)00378-5 ↗
6. Watanabe T.: in ‘Microstructure control theory of plated film’, (ed. Chen Z. P. et al.), 1–71; 2006, Beijing, Chemical Industry Publishing.10.1016/B978-008044375-1/50010-5 ↗
7. 10.1016/S1044-5803(02)00305-410.1016/S1044-5803(02)00305-4 ↗
8. 10.1023/A:102504980263510.1023/A:1025049802635 ↗
9. 10.1038/3388810.1038/33888 ↗
10. Yang S. W. · Acta Metall. Sin. · 2003 · 39 · 579
11. 10.1016/S0965-9773(99)00050-110.1016/S0965-9773(99)00050-1 ↗
12. Ovid I. A. · Rev. Adv. Mater. Sci. · 2005 · 10 · 89
13. 10.1016/0001-6160(67)90211-810.1016/0001-6160(67)90211-8 ↗