journal article·2010-10

High temperature deformation and microstructural evolution of Mg–Gd–Y alloys

X. B. Liu, R. S. Chen, E. H. Han

Materials Science and Technology· Volume 26· Issue 10
Publisher page

Abstract

The high temperature deformation behaviours of Mg–10Gd–3Y (GW103) alloys processed by extrusion and extrusion followed by equal channel angular extrusion (ECAE) were investigated and compared, and the maximum tensile elongations of 390 and 490% were obtained in the two specimens respectively. The different processing routes led to different microstructural features, and the extrusion followed by ECAE (EX-ECAE) specimens usually showed higher elongations than as extruded ones under the same deformation conditions. The deformation mechanisms of GW103 alloys were analysed in terms of the strain rate sensitivity exponent, microstructural evolution and activation energy. The high elongations of as extruded specimens were attributed to the combined effects of dynamic recrystallisation and grain boundary sliding, which was accompanied by lattice diffusion. However, grain boundary sliding controlled by the combination of grain boundary and lattice diffusions was dominant in the EX-ECAE specimens.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory for Corrosion and ProtectionInstitute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China, Graduate School of the Chinese Academy of Sciences, Beijing 100039, China

State Key Laboratory for Corrosion and ProtectionInstitute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China;, Email: rongshichen@yahoo.com

State Key Laboratory for Corrosion and ProtectionInstitute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China

References (30)

Show source-provided references
1. 10.1016/S0921-5093(00)01354-X10.1016/S0921-5093(00)01354-X ↗
2. 10.1016/j.jallcom.2003.10.06510.1016/j.jallcom.2003.10.065 ↗
3. Matsubara K., Miyahara Y., Horita Z., and Langdon T. G.: Acta Mater. 2003, 51, 3073–3084.10.1016/S1359-6454(03)00118-6 ↗
4. 10.1016/j.msea.2006.01.04310.1016/j.msea.2006.01.043 ↗
5. Lapovok R., Thomson P. F., Cottan R., and Estrin Y.: Mater. SeL Eng. A, 2005, A410-A411,390–393.10.1016/j.msea.2005.08.067 ↗
6. 10.1016/S1359-6462(02)00064-710.1016/S1359-6462(02)00064-7 ↗
7. 10.1016/S0921-5093(00)01974-210.1016/S0921-5093(00)01974-2 ↗
8. Watanabe H., Mukai T., Kohzu M., Tanabe S., and Higashi K.: Acta Mater. 1999, 47, 3753–3758.10.1016/S1359-6454(99)00253-0 ↗
9. Mabuchi M., Ameyama K., Iwasaki H., and Higashi K.: Acta Mater. 1999, 47, 2047–2057.10.1016/S1359-6454(99)00094-4 ↗
10. Mussi A., Blandin J. J., Salvo L., and Rauch E. F.: Acta Mater. 2006, 54, 3801–3809.10.1016/j.actamat.2006.04.011 ↗
11. 10.1201/978148226516310.1201/9781482265163 ↗
12. 10.2320/matertrans.42.15710.2320/matertrans.42.157 ↗
13. 10.1016/S0921-5093(98)00853-310.1016/S0921-5093(98)00853-3 ↗
14. 10.1016/j.msea.2006.05.17210.1016/j.msea.2006.05.172 ↗
15. 10.1016/j.msea.2004.12.03510.1016/j.msea.2004.12.035 ↗
16. Galiyev A., Kaibyshev R., and Gottstein G.: Acta Mater. 2001, 49, 1199–1207.10.1016/S1359-6454(01)00020-9 ↗
17. 10.1016/j.msea.2005.06.01410.1016/j.msea.2005.06.014 ↗
18. 10.1016/S0749-6419(00)00042-510.1016/S0749-6419(00)00042-5 ↗
19. Bae D. H., and Ghosh A. K.: Acta Mater. 2000, 48, 1207–1224.10.1016/S1359-6454(99)00445-0 ↗
20. Kaibyshev O. A.: in ‘Superplasticity of alloys, intermetallides and ceramics’, 316; 1992, Berlin, Springer.10.1007/978-3-642-84673-1 ↗
21. 10.1016/0079-6425(89)90004-210.1016/0079-6425(89)90004-2 ↗
22. 10.1016/S0921-5093(02)00216-210.1016/S0921-5093(02)00216-2 ↗
23. 10.1007/BF0056064710.1007/BF00560647 ↗
24. Lee C. J., and Huang J. C.: Acta Mater. 2004, 52, 3111–3122.10.1016/j.actamat.2004.03.012 ↗
25. Pilling J., and Ridley N.: in ‘Superplasticity in crystalline solids’, 16-47; 1989, London, The Institute of Metals.
26. 10.1016/j.msea.2007.06.09010.1016/j.msea.2007.06.090 ↗
27. Sivakesavam O. · Mater. Set Technol · 1993 · 9 · 805
28. Soer W. A., Chezan A. R., and Hosson J. T. M. D.: Acta Mater. 2006, 54, 3827–3833.10.1016/j.actamat.2006.04.014 ↗
29. 10.1179/mst.1997.13.10.82510.1179/mst.1997.13.10.825 ↗
30. Frost H. J., and Ashby M. F.: in ‘Deformation mechanism Maps’, 44; 1982, Oxford, UK, Pergamon Press.