journal article·2014-05

Structure characterization of alumina–silica coatings prepared on polyimide substrate by sol–gel

X. Zhang, L. Mao, J. Ma

Materials Science and Technology· Volume 30· Issue 6
Publisher page

Abstract

Alumina–silica coatings were prepared on polyimide substrate by sol–gel method using aluminium isopropoxide and tetraethyl orthosilicate as the precursors. The molar ratios of Si/Al were designed as 1∶3, 1∶1 and 3∶1. The surface morphology and structure of as-deposited coatings were investigated by various complementary analysis techniques. The results indicate that all silica–alumina coatings show a smooth and dense surface and have a thickness of ∼400 nm. After treatment at 230°C, the alumina–silica coatings are a diphase structure of AlOOH and amorphous silica, the same as the corresponding gel powders. Moreover, after calcination at 550°C, the alumina–silica gel powders still remain a diphase structure, but AlOOH transforms into γ-Al2O3. The Si content has no obvious effect on the phase structure. However, increasing the Si/Al ratio in the as deposited coatings causes the binding energies of Si 2p, Al 2p and O 1s peaks to shift to higher energy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrophoretic Deposition in Materials Science · Synthesis and properties of polymers · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China

References (32)

Show source-provided references
1. 10.1016/j.surfcoat.2007.02.02610.1016/j.surfcoat.2007.02.026 ↗
2. 10.1016/0008-6223(94)00162-S10.1016/0008-6223(94)00162-S ↗
3. Kaiser N. · Proc. SPIE Int. Soc. Opt. Eng. · 1993 · 2114 · 325
4. Bodemann A. · Proc. SPIE Int. Soc. Opt. Eng. · 1993 · 2114 · 405
5. Chen Z. F. · JCT Res. · 2006 · 3 · 231
6. 10.1021/jp062252d10.1021/jp062252d ↗
7. 10.1021/jp030094+10.1021/jp030094+ ↗
8. 10.1016/j.jcat.2004.10.01310.1016/j.jcat.2004.10.013 ↗
9. 10.1021/j100055a04210.1021/j100055a042 ↗
10. 10.1021/ja00272a00410.1021/ja00272a004 ↗
11. 10.1016/j.matchemphys.2005.05.04410.1016/j.matchemphys.2005.05.044 ↗
12. 10.1016/S0022-4596(03)00321-910.1016/S0022-4596(03)00321-9 ↗
13. 10.1007/BF0243718710.1007/BF02437187 ↗
14. 10.1021/cr00099a00310.1021/cr00099a003 ↗
15. Ding X. Z. · Mater. Sci. Eng. · 1994 · 12 · 1
16. 10.1023/A:102078581868710.1023/A:1020785818687 ↗
17. 10.1016/S0167-577X(00)00120-810.1016/S0167-577X(00)00120-8 ↗
18. 10.1023/A:102267580940410.1023/A:1022675809404 ↗
19. Zhang X. · Hebei Ind. Sci. Technol. · 2010 · 27 · 149
20. 10.1016/S0022-3093(97)00105-110.1016/S0022-3093(97)00105-1 ↗
21. 10.1023/A:100651721903710.1023/A:1006517219037 ↗
22. 10.1023/A:102267410705910.1023/A:1022674107059 ↗
23. 10.1016/j.tsf.2008.01.02310.1016/j.tsf.2008.01.023 ↗
24. Zhang X. · Aerosp. Mater. Technol. · 2007 · 37 · 19
25. 10.1016/j.surfcoat.2006.11.01210.1016/j.surfcoat.2006.11.012 ↗
26. 10.1016/0022-3093(83)90301-010.1016/0022-3093(83)90301-0 ↗
27. Socrates G. ‘Infrared characteristic group frequencies’, 2nd edn, 188–194; 1994, Chichester, Wiley.
28. 10.1023/A:101835163065210.1023/A:1018351630652 ↗
29. 10.1016/j.jnoncrysol.2005.01.08010.1016/j.jnoncrysol.2005.01.080 ↗
30. 10.1016/j.micromeso.2006.06.01410.1016/j.micromeso.2006.06.014 ↗
31. 10.1021/jp065767d10.1021/jp065767d ↗
32. 10.1039/B205209C10.1039/B205209C ↗