Stress–relief cracking of 9 wt-%Cr steels containing 0–2 wt-%Mo
Source abstract
Abstract
The stress-relief cracking susceptibility of simulated heat affected zone (HAZ) microstructures in 9 wt-%Cr steel alloys has been assessed using a four-point bend test procedure. Five alloys were examined, in which the levels of molybdenum, phosphorus, and sulphur were deliberately varied. Stress–relief cracking was apparent only in HAZ microstructures heated to ≥1320°C during simulation. In this condition, alloys containing no molybdenum were most susceptible, exhibiting a low-ductility intergranular mode of fracture during stress-relief heating between 550 and 650–C, and intergranular microvoid coalescence at higher temperatures up to the hold level of 735°C. Phosphorus was found to exacerbate cracking by the low-ductility mechanism, and was observed to segregate to grain boundaries together with a local enrichment of sulphur at crack tips. The presence of molybdenum in 9Cr–1Mo and 9Cr–2Mo alloys greatly reduced susceptibility to stress-relief cracking. The low-ductility fracture mode was completely eliminated in these alloys, despite high levels of phosphorus and sulphur, qnd the tendency to form intergranular cavities was reduced. These effects were associated with the formation of δ-ferrite at grain boundaries during HAZ simulation, promoted by molybdenum additions. A range of low–alloy steels has previously been assessed using the same experimental procedure, and in comparison, the 9Cr–1 Mo and 9Cr–2Mo alloys were highly resistant to stress–relief cracking.MST/317
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. FIDLER R. · Report R/M/R261, CERL, Leatherhead, 1977
2. NICHOLS R. W. · Weld. World · 1969 · 7 · 244
3. PURAZRANG K. · Weld. J., · 1976 · 55 · 835
4. 10.1098/rsta.1980.010910.1098/rsta.1980.0109 ↗
5. 10.1179/03071697980327616510.1179/030716979803276165 ↗
6. HIPPSLEY C. A. · 1984
7. B. C. EDWARDS, C. A. HIPPSLEY, and J. A. HUDSON: in Terrific alloys for use in nuclear energy technologies', 83; 1983, Warrendale, Pa, The Metallurgical Society of AIME.
8. 10.1016/0308-0161(84)90033-410.1016/0308-0161(84)90033-4 ↗
9. 10.1016/0025-5416(79)90083-110.1016/0025-5416(79)90083-1 ↗
10. 10.1179/03063458479041983610.1179/030634584790419836 ↗
11. HOPKINS B. E. · J. Iron Steel Inst · 1971 · 209 · 745
12. 10.1179/03063457679043205610.1179/030634576790432056 ↗
13. 10.1179/03071697580327735710.1179/030716975803277357 ↗
14. R. W. K. HONEYCOMBE: ‘Steels — microstructures and properties’, 76; 1981, London, Edward Arnold.
15. ARATA Y. · Trans. JWRI · 1975 · 5 · 135
16. MATSUDA F. · Trans. JWRI · 1979 · 8 · 105
17. 10.1016/0036-9748(80)90114-310.1016/0036-9748(80)90114-3 ↗
18. ITO Y. · IIW Doc. X 668-72 · 1972
19. MEITZNER C. F. · Weld. J · 1969 · 48 · 431s
20. TURKDOGAN E. T. · J. Iron Steel Inst · 1955 · 180 · 349
21. BAKER T. J. · J. Iron Steel Inst · 1973 · 211 · 783