journal article·2007-10

Critical study of microforging Au ball on Al coated silicon substrate using finite element method

N. Srikanth

Materials Science and Technology· Volume 23· Issue 10
Publisher page

Abstract

Microforging of a gold ball on aluminium coated silicon substrate is an important process step during the interconnection of gold wires in microelectronics industry. Understanding the deformation mechanism helps to achieve the required deformed profile of the ball with maximum shear strength of the weld and minimum residual stress in the weld so as to avoid cratering of the silicon die. In the present paper, finite element based numerical modelling is well described to understand the stress and the deformation behaviour during such deformation process. In addition, experiments have been conducted to validate the numerical prediction in terms of the ball deformation. Numerical results show that maximum stress is induced at the SiO2 interface during the peak impact load application. Additionally the effect of additional ultrasonic energy during ball deformation and the growth of the intermetallics on the gold wirebond's integrity are discussed in detail.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Advanced Surface Polishing Techniques · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Levine L. · Solid State Technol · 1993 · 63
2. Srikanth N., Wen Y. Y., Lim C. T., Kumar B. S., Vath C. J.III, and Kuah T. H.: Proc. Int. Conf. on ‘Advances in packaging’, Singapore, December2001, 251–258.
3. Rao R. T., and Rymaszewski E. J. ‘Microelectronic packaging handbook’; 1989, New York, Van Nostrand Reinhold.
4. Harman G. G. ‘Wire bonding in microelectronics';1989, New York, McGraw-Hill.
5. Pecht M. and P. Lall: in ‘Thermal stress and strain in microelec-tornics packaging’, (ed. Lau J. H.); 1993, New York, Van Nostrand Reinhold.
6. 10.1115/1.290536410.1115/1.2905364 ↗
7. 10.1016/0017-9310(94)00293-510.1016/0017-9310(94)00293-5 ↗
8. 10.1016/0017-9310(94)00294-610.1016/0017-9310(94)00294-6 ↗
9. Buch A. ‘Pure metals properties — a scientific technical handbook';1999, Materials Park, OH, ASM International.
10. Harding J. ‘Mechanical properties at high rates of strain';1974, London, The institute of physics.
11. 10.1115/1.279267210.1115/1.2792672 ↗
12. Wagoner R. H., and Chenot J. L. ‘Metal forming analysis’; 2001, New York, Cambridge University Press.10.1017/CBO9781139087070 ↗
13. 10.1016/S0734-743X(01)00039-210.1016/S0734-743X(01)00039-2 ↗
14. ‘ABAQUS standard user's manual’, Vol. 1 and 2;2000, Pawtucket, RI, Hibbitt, Karlsson & Sorensen.
15. 10.1109/6104.84693410.1109/6104.846934 ↗
16. 10.1115/1.164806210.1115/1.1648062 ↗
17. Ohno Y., Ohzeki Y., Aso T., and Kitamura O.: Proc. 42nd Electronic Components and Technology Conf., Atlanta, GA, May1992, Institute of Electrical and Electronics Engineers,899–902.
18. 10.1109/TPHP.1977.113522510.1109/TPHP.1977.1135225 ↗
19. Harman G. G., and Leedy K. O.: Proc. 10th Annual Reliability Physics Symp., Las Vegas, NV, April1972, IEEE,49–56.
20. Langenecker B. · J. Inst. Met · 1963 · 91 · 316
21. Okamoto H. ‘Phase diagrams for binary alloys’, 25; 2000, Materials Park, OH, ASM International.
22. 10.1016/0038-1101(70)90172-310.1016/0038-1101(70)90172-3 ↗
23. Gehman B. L. · IEEE Trans. Comp · 1980 · 375
24. 10.1016/S0025-5408(03)00004-710.1016/S0025-5408(03)00004-7 ↗
25. Ramsey T. H. · Solid State Technot · 1991 · 37
26. Shewmon P. ‘Diffusion in solids’, 2nd edn; 1989, Warrendale, PA, TMS.
27. 10.1109/TCHMT.1978.113529110.1109/TCHMT.1978.1135291 ↗
28. Murali S. · III: Proc. Conf. SEMICON · 2004 · 1
29. 10.1016/j.matlet.2004.05.07010.1016/j.matlet.2004.05.070 ↗