Numerical analysis of liquid fraction in solid–liquid phase transformation of semisolid alloy
Source abstract
Abstract
The non-linear mathematical expression of liquid fraction in solid–liquid phase transformation of semisolid alloy was derived by thermodynamic equations, and the numerical solution of the non-linear mathematical expression was obtained by the Gauss Newton iteration algorithm. The solid–liquid phase transformation of hypereutectic Al–20Si–3Fe–1Mn–4Cu–1Mg alloy was studied by differential scanning calorimetry, and it was used for the expression reliability validation and compared with the Scheil linear regression expression. The results showed that the liquid fraction of the semisolid alloy was not increased linearly with the heating temperature increasing, but increased non-linearly, which was not consistent with the Scheil expression, and the growth rate of liquid fraction was not entirely the same in different temperature ranges. The non-linear mathematical expression data fit well with the experimental data, and the non-linear mathematical expression had a smaller discrete degree and higher credibility compared with the Scheil linear regression expression. The relationship of liquid fraction and heating temperature of the semisolid alloy can be reflected by means of the non-linear mathematical expression in the case of solid–liquid phase transformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Shenyang University of Technology, Liaoning 110870, China
College of Mechanical Engineering, Inner Mongolia University for the Nationalities, Inner Mongolia, Tongliao 028042, China
References (16)
Show source-provided references
1. 10.1179/026708310X1281599241801210.1179/026708310X12815992418012 ↗
2. Wang XY: ‘The microstructure evolution and melting behavior of inhomogenous materials during controlled heating process’; 2003, Xi'an, Northwestern Polytechnical University.
3. 10.1179/1743284712Y.000000007810.1179/1743284712Y.0000000078 ↗
4. Wang SL: ‘Study on measurement technology about solid-phase volume fraction of semi solid magnesium alloy’; 2009, Dalian, Dalian University of Technology.
5. Lu GM · J. Northeastern Univ. (Nat. Sci.) · 2002 · 23 · 876
6. Zeng DX · J. Hubei Univ. Automotive Technol. · 2001 · 15 · 16
7. Yang Q: ‘Simulation to solidification and cast of metals’; 1996, Hangzhou, Zhejiang University Press.
8. Luo ZH · Foundry Technol. · 2005 · 26 · 557
9. Chen GT and Wang YZ: ‘Engineering thermodynamics’; 2008, Beijing, Beijing Institute of Technology Press.
10. Hu HQ: ‘The principle of metal solidification’; 1988, Beijing, China Machine Press.
11. Zhu J: ‘The principle of linear model analysis’; 2000, Beijing, Science Press.
12. Zhao JP · Petro-Chem. Equip. · 2004 · 33 · 29
13. Yu BLJ and Jiang D: ‘Practical thermoanalysis’; 1990, Beijing, China Textile and Apparel Press.
14. 10.1007/BF0266501510.1007/BF02665015 ↗
15. Liu B: ‘Research on microstructure properties and semi solid forming technology of Al–Fe alloys’; 2012, Shenyang, Shenyang University of Technology.
16. 10.1016/j.jallcom.2009.06.16510.1016/j.jallcom.2009.06.165 ↗