journal article·1993-12

Nitrogen uptake by austenitic stainless steels on annealing in N 2 –H 2 atmospheres

R. F.A. Jargelius-Pettersson, T. Ekman, S. Hertzman, T. Holm, J. Linder

Materials Science and Technology· Volume 9· Issue 12
Publisher page

Abstract

Laboratory simulation of bright annealing of types 301 and 304L stainless steel has been performed in N 2 –H 2 atmospheres. Nitrogen profiles have been quantified by glow discharge optical emission spectroscopy and electron microprobe analysis, whereas transmission electron microscopy has been utilised to characterise the surface phase status after annealing. Systematic variation in the water content of the annealing atmosphere showed that at low water vapour levels, Cr 2 N precipitates could coexist with a surface film of silicon oxide or be inhibited by the presence of a metal aluminium silicate, whereas at higher water vapour levels, nitride precipitation was completely suppressed by the formation of a Cr–Mn spinel type oxide. The results are discussed in thermodynamic terms, and kinetic limitations caused by the development of an oxidised surface are considered in some detail. It was found that, in addition to the more obvious variables of alloy content and nitrogen activity, surface reactions and cooling rate are critical parameters controlling the surface nitrogen composition. MST/1811
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Corrosion Behavior and Inhibition · Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. ELLISON T. L., , SHAY R. H., , and BERGER K. R.: Met. Prog., June 1983,37-44.
2. 10.1007/BF0264773110.1007/BF02647731 ↗
3. 10.1007/BF0283318510.1007/BF02833185 ↗
4. FRISK K. JOHANSSON A. and LINDBERG C.: ‘Sintering — advances in powder metallurgy and particulate materials’ Vol. 3 167-181; 1992 Princeton NJ Metal Powder Industries Federation.
5. KIKUCHI M., and TANAKA R. J.: J. Iron Steel Inst. Jpn, 1983, 69, (2), 85–88.
6. HERTZMAN S. R. E A. JARGELIUS-PETTERSSON and J. LINDER: ‘Nitrogen uptake by type 301 and 304L austenitic stainless steel on annealing in N2/H2 atmospheres’ Report IM/2894 Swedish Institute for Metals Research Stockholm 1992.10.1179/mst.1993.9.12.1123 ↗
7. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗