journal article·2006-02

Transformation of austenite remaining after intercritical rolling to ferrite

V. M. Khlestov, E. V. Konopleva, H. J. McQueen

Materials Science and Technology· Volume 22· Issue 2
Publisher page

Abstract

The impact of austenite deformation in the intercritical range on the rate of transformation in continuous cooling to ferrite, pearlite, bainite or martensite has been studied. The austenite associated with the rolled ferrite is much higher in carbon content, which does not influence the pearlite transformation but retards bainite and martensite. Furthermore, in comparison with rolling of stable austenite the increased strain hardening of the intercritically cooled austenite accelerates the formation of ferrite and pearlite (+ 10–30°C) and refines them but retards the bainite and martensite transformations (−20–40°C). At the intermediate cooling rate near 16 K s−1, these several influences combined with near doubling of the ferrite production give rise to the suppression of bainite formation and to maximum increased delay of martensite start.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. 10.1179/cmq.1998.37.2.7510.1179/cmq.1998.37.2.75 ↗
2. Khlestov V. M., and Dorozhko G. K. ‘Transformation of deformed austenite in steel’, 407; 2002, Mariupol, Priazovsky State Technical University.
3. 10.1179/cmq.1996.35.2.16910.1179/cmq.1996.35.2.169 ↗
4. 10.1179/mst.1998.14.8.78310.1179/mst.1998.14.8.783 ↗
5. Kaspar R., Streisselberger A., and Pawelski O.: in ‘Thermomechanical processing of microalloyed austenite’, (ed.Deardo A. J. et al), 555-573; 1982, New York, TMS.
6. Sandberg A., and Roberts W.: in ‘Thermomechanical processing of microalloyed austenite’, (ed.Deardo A. J. et al), 405-431; 1982, New York, TMS.
7. 10.1179/00084430179438842510.1179/000844301794388425 ↗
8. Kurdyumov G. V., Utevsky L. M., and Entin R. I. ‘Transformations in iron and steel’, 238; 1977, Moscow, Nauka.
9. Dorozhko G. K. · Metallovedenie i Termicheskaya Obrabotka Metallov · 1977 · 12 · 24
10. Khlestov V. M. · Izvestia AN USSR Metally · 1980 · 5 · 108
11. Khlestov V. M. · Fizika i Khimia Obrabotki Materialov · 1979 · 3 · 120
12. Popova L. E., and Popov A. A. ‘Transformation diagrams of austenite in steels’, 503; 1991, Moscow, Metallurgia.
13. Bernshtein M. L., Zaimovsky V. A., and Kaputkina L. M. ‘Thermomechanical processing of steels’, 480; 1983, Moscow, Metallurgia.