Microstructures in hot wire laser beam welding of HY 80 steel
Source abstract
Abstract
Laser beam welding of 13 mm plates of HY 80 steel resulted in different microstructures in the fusion zone depending on the welding process. Autogenous welds resulted in an untempered martensitic structure, whereas, with the introduction of a hot wire filler metal, the microstructures depended on the wire feed. A slow feed resulted in a mixed martensite–bainite microstructure and a fast wire feed resulted in a microstructure that is primarily acicular ferrite. The chemistry of the as deposited weld metals was different in each case. The thermal profiles for the autogenous weldment were calculated based on a two parameter model of laser welding that utilises the fusion zone boundary as a measure of ‘best fit’. Based on the cooling rate of the autogenous fusion zone, cooling rates for the two welds with hot wire filler metal were rationalised. Using these cooling rates, the chemistry of the weld metal and a model of microstructural development of the weld metal, a computer calculation was made which gave volume fractions of the phases similar to those observed experimentally.MST/1845
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (2)
Show source-provided references
1. 1990 · 69 · 272
2. 1992 · 71 · 201