Microstructure and formation mechanism of deterioration layer in hardened steel chips during high speed machining
Source abstract
Abstract
To reveal the mechanism of chip formation and tool-chip interface friction during high speed machining,the microstructure observation by optical microscope,SEM,electron probe and TEM,and the analysis of shear band and white layer in shear deformation were carried out.The investigation shows that there are adiabatic shear bands in primary shear zones between the saw teeth.The different microstructures,such as martensite lath,elongated martensite laths divided by dislocations and equiaxed grains,appear in turn from the chip matrix to the center of shear band.There are white layers,which have amorphous microstructure,in second shear zones on the bottom of chips.No phase change occurs during the formation of shear band,but its formation mechanism is based on a rotary dynamic recrystallization,while the amorphous and martensite transformation occur during the formation of white layer,its formation is based on phase transition mechanism.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Advanced machining processes and optimization · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.