Effect of trace Sc,Zr on recrystallization processing and internal-friction properties of Al-Mg-Mn alloy
Source abstract
Abstract
To study the effects of trace Sc,Zr on Al-Mg-Mn alloy,Al-6.0 Mg-0.5 Mn-(Sc、Zr) alloy were prepared by ingot metallurgy,and its microstructures,recrystallization processing and internal-friction properties were studied by means of optical microscope(OM) ,micro-hardness testing,transmission electronic microscope(TEM) and low-frequency torsion method.Results show that,0.21wt.% Sc and 0.15wt.% Zr can fine the casting microstructure of Al-6.0Mg-0.5Mn alloy.The strong pin dislocation and grain boundary of Al3Sc1-xZrxparticles prohibit the alloy’s recrystallization.After 54% cold deformation,the Al-6.0Mg-0.5Mn-0.21Sc-0.15Zr alloy shows non-linear internal friction character.The internal friction increases with the increased temperature and decreased tested frequency.An internal friction peak occurs at 326 ℃ in heating Q-1-T curve tested at the frequency of 1 Hz and the strain amplitude of 4.6 × 10-5,which is induced by dislocation interacting with fine precipitation particle Al3Scl-x Zrx,and can be explained by the mechanism of dislocation pull-ff from the pinned Al3Scl-xZrx particles.It can be concluded that the trace Sc,Zr can fine the microstructure and prohibit the recrystallization of Al-Mg-Mn alloy,and cause the appearance of internal friction in the alloy’s heating Q-1-T curve.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.