article·2011-01-01

Effects of content and size of reinforcing particles on mechanical properties of SiCp/Fe composites processed by dynamic hot press sintering

Wang Yaomian, Yaping Zong, Zhuang Weibin, Li Jie

Abstract

SiCp/Fe composites with SiC volume fractions from 5% to 15% and different particle sizes from 3 μm to 45 μm respectively were manufactured by the specimen current heating dynamic hot press sintering,and their effects on the properties such as Vickers hardness,strength,elongation and wear resistance were investigated.It is shown that the properties are improved significantly as the volume fraction is increased from 5% to 10% but are deteriorated as the fraction is further increased to 15% because of production of agglomeration of the SiC particles.SiC particle distribution can be improved with large particle size,so that the composite properties become better by increasing the size to 13 μm.However,the properties go down as the particle size is further increased to above the critical value because large SiC particles have low strength themselves.The SiCp/Fe composites with particle volume fraction of 10% and size of 13 μm can demonstrate a remarkably yield stress of 949 MPa and Vickers hardness of 501HV5.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.