article·2010-01-01

Influence of pulse parameters on the microstructure and microhardness of nickel electrodeposits

Huiqin Li

Abstract

To optimize the nickel pulse plating process,the scanning electron microscope,X-ray diffraction and microhardness tester were used to determine the influence of pulse on-time,pulse off-time and peak current density on the grain size,surface morphology,crystal orientation and microhardness of the nickel electrodeposits. The study shows that at constant off-time and peak current density,the crystal size of the deposits initially decreases and then starts to increase with the increasing pulse on-time. The crystal orientation progressively changes from a (111) texture at the on-time of 0. 1 ms to a strong (200) texture at the on-time of 8 ms. The increase of pulse off-time at the constant on-time and peak current density results in a progressive increase in crystal size,while the crystal orientation remains unaffected. The increase of peak current density results in considerable refinement in crystal size of the deposits. The crystal orientation progressively changes from an almost random distribution at the lowest peak current density of 0. 2 A/cm2 to a strong (200) texture at the peak current density of 2. 0 A/cm2. The microhardness of deposits is related with grain size. When the grain size is large,the microhardness is consistent with Hall-Petch law (HPL). When the grain size is ultrafine,nanoeffect will be generated,and the microhardness is against HPL. Therefore,pulse on-time,pulse off-time and peak current density have distinct influence on microhardness of the deposits.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.