Numerical simulation of dimples and analysis of limit forming forces in multi-point forming of sheet metal
Source abstract
Abstract
Dimple is a particular defects in multi-point forming(MPF) of sheet metal, solid element is more accurate than shell element when the process of dimple formation is simulated. However, if solid element is employed when blank is relatively thin, the number of elements will be extraordinarily large and a very long of CPU time will be cost. To obtain reasonable computational efficiency and simulation results, sphere and saddle surfaces part with different thickness and materials are simulated and compared. Results indicate that the simulation results of dimple by shell element model are also accurate when the ratio of thickness and wideness of blank is less than 0.015. But when the ratio is more than 0.015, solid element model should be adopted. Based on above results, the limit forming force of sphere and saddle parts to obtain accurate results with different thickness and different curvatures are analyzed when dimples occur, and the limit forming force diagrams are plotted while thickness strain of dimples are 1% and 5%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.