Friction and wear behavior of Al_2O_3·SiO_2 particle reinforced Al matrix composites
Source abstract
Abstract
The results of study on the friction and wear behavior of ZL109 matrix/Al2O3·SiO2 particle reinforced MMC made by squeeze-casting indicated that the wear resistance of the composites was improved by adding Al2O3·SiO2 particles. In comparison with its matrix alloy, the composite has a lower friction coefficient. Under reatively lower loads and sliding speeds, the wear resistance of MMC is superior to that of the Al matrix. The friction coefficient is always lower than that of Al matrix. In comparison with Al matrix . The improvement of wear resistance of MMC decreased under higher loads and sliding speeds, but the friction coefficient of MMC can still maintain a lower value, because the wear mechanism of MMC have been transformed with increasing load and sliding speed. The effect of Al2O3·SiO2 paticles on the friction and wear behavioe of the MMC is also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.