journal article·2011-12

Tool life model for Al2O3 particle reinforced MMCs using genetic expression programming

M Kök, E Kanca, Ö Eyercioğlu

Materials Science and Technology· Volume 27· Issue 12
Publisher page

Abstract

In the present work, the wear of cutting tools in the machining of 7075Al alloy composites reinforced with 10 and 25 wt- and 16 μm average size Al2O3 particles was investigated. Machining tests were performed on both as cast and heat treated composites by turning process using a physical vapour deposition coated carbide tool CP500 at different cutting conditions. A new model was developed to predict the tool life by genetic expression programming. The training and validation data sets were obtained from the well established machining test results. The weight fraction of particle Pw, cutting speed V, feedrate f and heat treatment Ht were used as independent input variables, while tool life T was used as a dependent output variable. Different models for tool life were predicted on the basis of the training data set using genetic programming, and the accuracy of the best model was proved with validation data set. The test results showed that the genetic expression programming model has produced correlation coefficient R values of ∼0·958 for the training data and 0·952 for the validation data. The predicted tool life results were compared with experimental results and found to be in good agreement with the experimentally observed ones.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Aluminum Alloys Composites Properties · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Program, Kahramanmaraş MYO, Kahramanmaraş Sütçü Imam University, Karacasu Campus, Kahramanmaraş 46100, Turkey

Department of Mechanical Engineering Department, University of Mustafa Kemal, İskenderun, Hatay, Turkey

Department of Mechanical Engineering Department, University of Gaziantep, Gaziantep, Turkey

References (48)

Show source-provided references
1. Rogathi P · J. Organomet. Chem. · 1991 · 43 · 10
2. 10.1007/BF0322336110.1007/BF03223361 ↗
3. Joshi SS, Ramakrishnan N, Sarathy D, Ramakrishnan P: ‘Development of the technology for discontinuously reinforced aluminium composites’, Proc. 1st World Conf. on ‘Integrated design and process technology’, Vol. 1, 492–497; 1995, Austin, TX, Society for Design and Process Science.
4. 10.1016/0924-0136(94)01661-J10.1016/0924-0136(94)01661-J ↗
5. 10.1016/S0007-8506(07)63135-710.1016/S0007-8506(07)63135-7 ↗
6. 10.1016/S0007-8506(07)61151-210.1016/S0007-8506(07)61151-2 ↗
7. 10.1016/0924-0136(95)02115-910.1016/0924-0136(95)02115-9 ↗
8. 10.1016/S0257-8972(97)00521-510.1016/S0257-8972(97)00521-5 ↗
9. 10.1016/S0924-0136(02)00467-310.1016/S0924-0136(02)00467-3 ↗
10. Finn M, Srivastava A: ‘Machining of advanced and engineered materials’, Proc. CSME Symp., Hamilton, Ont., Canada, May 1996, McMaster University, 616–623.
11. Lane CT: ‘Machinability of Al composites as a function of matrix alloy and heat treatment’, Proc. Machining of Composites Materials Symp., ASM Materials Week, Chicago, IL, USA, November 1992, ASM International, 3–15.
12. 10.1016/S0924-0136(99)00405-710.1016/S0924-0136(99)00405-7 ↗
13. 10.1016/S0924-0136(98)00444-010.1016/S0924-0136(98)00444-0 ↗
14. 10.1016/S0924-0136(98)00379-310.1016/S0924-0136(98)00379-3 ↗
15. 10.1016/S0924-0136(98)00054-510.1016/S0924-0136(98)00054-5 ↗
16. 10.1016/0924-0136(92)90279-210.1016/0924-0136(92)90279-2 ↗
17. 10.1016/0043-1648(94)07109-810.1016/0043-1648(94)07109-8 ↗
18. 10.1016/S0007-8506(07)61153-610.1016/S0007-8506(07)61153-6 ↗
19. 10.1016/S0007-8506(07)60873-710.1016/S0007-8506(07)60873-7 ↗
20. 10.1016/S0921-5093(00)00900-X10.1016/S0921-5093(00)00900-X ↗
21. 10.1016/j.msea.2006.11.04010.1016/j.msea.2006.11.040 ↗
22. 10.1016/j.msea.2007.09.01610.1016/j.msea.2007.09.016 ↗
23. Channakesavarao B, Reddy PN, Komariah N, Malla RD: ‘Machinability of vacuum hot pressed metal matrix composites’, Proc. 17th AIMTDR Conf., 53–56; 2000, Warangal, REC Warangal.
24. Hocheng H · Composites Part A · 1997 · 28 · 81310.1016/S1359-835X(97)00055-9 ↗
25. 10.1016/1359-835X(95)00001-I10.1016/1359-835X(95)00001-I ↗
26. 10.1016/S0007-8506(07)62403-210.1016/S0007-8506(07)62403-2 ↗
27. 10.1016/S0924-0136(02)00935-410.1016/S0924-0136(02)00935-4 ↗
28. 10.1016/j.matdes.2006.02.01010.1016/j.matdes.2006.02.010 ↗
29. 10.1016/j.jmatprotec.2007.04.04410.1016/j.jmatprotec.2007.04.044 ↗
30. 10.1016/j.jmatprotec.2007.04.12110.1016/j.jmatprotec.2007.04.121 ↗
31. 10.1016/j.jmatprotec.2008.02.02010.1016/j.jmatprotec.2008.02.020 ↗
32. 10.1080/1042691980893522110.1080/10426919808935221 ↗
33. Ramulu M, Kim D, Kao H: SME technical paper no. MR03-171, ‘Tool life model for Al2O3 particle reinforced MMCs using genetic expression programming’, SME, Dearborn, MI, USA, 2003, 1–7.
34. Weinert K, Biermann D: ‘Turning of fibre and particulate reinforced aluminium’, Proc. Int. Conf. on ‘Machining of advanced materials’, Gaithersburg, MD, USA, July 1993, 437–453.
35. 10.1016/0924-0136(94)90159-710.1016/0924-0136(94)90159-7 ↗
36. 10.1115/1.283104710.1115/1.2831047 ↗
37. KozaJR: ‘Genetic programming: on the programming of computers by means of natural selection’; 1992, Cambridge, MA, MIT Press.
38. 10.1016/S0020-0255(02)00371-710.1016/S0020-0255(02)00371-7 ↗
39. 10.1016/j.eswa.2005.01.00310.1016/j.eswa.2005.01.003 ↗
40. Asbour AF · Comput. Struct. · 2003 · 81 · 33110.1016/S0045-7949(02)00437-6 ↗
41. Ferreira C · Complex Syst. · 2001 · 13 · 87
42. Ferreira C: ‘Gene expression programming in problem solving’, Proc. 6th Online World Conf. on ‘Soft computing in industrial applications, September 2001, World Federation of Soft Computing, 10–24.
43. Ferreira C: ‘Gene expression programming: mathematical modelling by an artificial intelligence’; 2002, Angra do Heroismo.
44. 10.1016/j.jmatprotec.2004.07.06810.1016/j.jmatprotec.2004.07.068 ↗
45. 10.1016/j.commatsci.2008.01.04210.1016/j.commatsci.2008.01.042 ↗
46. 10.1016/j.eswa.2008.07.01710.1016/j.eswa.2008.07.017 ↗
47. 10.1016/j.conbuildmat.2007.04.02110.1016/j.conbuildmat.2007.04.021 ↗
48. Kanca E · Comput. Mater. Continua · 2009 · 270 · 1