Characteristics of forming limit diagram of copper alloyed interstitial free steel
Source abstract
Abstract
Forming limit diagram of a promising high strength copper alloyed interstitial free steel has been determined by Nakazima tests under various processing conditions. Various parameters such as limiting strain, shear strain and strain ratio have been derived from the diagrams and analysed. The results have been compared with those of two traditional high strength interstitial free steels. It is observed that the formability parameters of copper alloyed interstitial free steel are lower than those of high strength interstitial free steels due to the effect of copper. Copper alloyed interstitial free steel in continuous annealed condition exhibits the highest limiting strain values among all the processing conditions and is comparable to traditional high strength interstitial free steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials EngineeringIndian Institute of Technology Kharagpur, Kharagpur 721 302, India, Department of Ferrous Metallurgy, RWTH Aachen University, Intzestrasse 1, Aachen, 52072, Germany;, Email: radhakanta.rana@corusgroup.com
Department of Metallurgical and Materials EngineeringIndian Institute of Technology Kharagpur, Kharagpur 721 302, India
Department of Ferrous MetallurgyRWTH Aachen University, Intzestrasse 1, Aachen, 52072, Germany
References (27)
Show source-provided references
1. 10.1179/02670830010150690210.1179/026708300101506902 ↗
2. 10.1002/(SICI)1521-396X(199806)167:2<427::AID-PSSA427>3.0.CO;2-I10.1002/(SICI)1521-396X(199806)167:2<427::AID-PSSA427>3.0.CO;2-I ↗
3. Takechi H.: ISIJ Int. 1994, 34, 1–8.10.2355/isijinternational.34.1 ↗
4. 10.1007/s11661-997-0108-410.1007/s11661-997-0108-4 ↗
5. Yang X., Vanderschueren D., Dilewijns J., and Standaert C.: ISIJ Int. 1996, 36, 1286–1294.10.2355/isijinternational.36.1286 ↗
6. de Cooman B. C. · Proc. Int. Forum on ‘The properties and application of IF steels’, Tokyo, Japan, May 2003, ISIJ, · 249
7. Senuma T.: ISIJ Int. 2001, 41, 520–532.10.2355/isijinternational.41.520 ↗
8. 10.1016/j.matlet.2006.10.03710.1016/j.matlet.2006.10.037 ↗
9. 10.1002/srin.20070625610.1002/srin.200706256 ↗
10. 10.1002/srin.20070625710.1002/srin.200706257 ↗
11. 10.1002/srin.20070625810.1002/srin.200706258 ↗
12. Kishida K.: Nipp. Steel Tech. Report,1995, (64), 33–35.
13. 10.2320/matertrans1989.40.26810.2320/matertrans1989.40.268 ↗
14. Hornbogen E. · Trans. Metall Soc. AIME · 1960 · 218 · 1064
15. 10.1007/BF0266937610.1007/BF02669376 ↗
16. 10.1080/0950083910821512110.1080/09500839108215121 ↗
17. 10.1088/0953-8984/6/2/02710.1088/0953-8984/6/2/027 ↗
18. 10.1080/0950083900820236210.1080/09500839008202362 ↗
19. Deschamps A., Militzer M., and Poole W. J.: ISIJ Int. 2001, 42, 196–205.10.2355/isijinternational.41.196 ↗
20. Rana R. · 2008
21. Hosford W. T., and Caddel R. M. ‘Metal forming mechanics and metallurgy’, 12th edn; 1993, Englewood Cliffs, NJ, Prentice-Hall.
22. Nakazima K. · Yawata Techn. Report · 1968 · 284 · 140
23. Dillamore I. L. · Proc. Conf. on ‘Effect of second phase particles on the mechanical properties of steel’, Scarborough, UK, March 1971, Corporate Laboratories of the British Steel Corporation and the Iron and Steel Institute, · 190
24. Lankford W. T. · Trans. ASM · 1950 · 42 · 1197
25. Dieter G. E. ‘Mechanical metallurgy’, SI metric edn; 1988, London, McGraw-Hill.
26. 10.1016/0022-3115(87)90525-310.1016/0022-3115(87)90525-3 ↗
27. Phythian W. J., Dumbill S., Brown P., and Sinclair R.: Proc. 6th Int. Symp. on ‘Environmental degradation in nuclear power systems—water reactors’, San Diego, CA, USA, August 1993, TMS,729–737.