Prediction of prestraining effect on fracture toughness of high strength structural steel by local approach
Source abstract
Abstract
In the present study, the tension and fracture toughness tests on high strength structural steel of Q420 were carried out in different conditions of non-prestraining and prestraining. The results indicated that the prestrain increased the yield stress and tensile strength, but decreased the fracture toughness. Meanwhile, the local parameters m and σu controlling the brittle fracture were obtained using finite element method (FEM) analysis. Based on the Weibull stress fracture criterion, the prestraining effect on the fracture toughness was predicted from fracture toughness results of the virgin material by the local approach. The prediction was in good agreement with the experimental results. It certified that the critical Weibull stress obeys the two-parameter Weibull distribution in the local approach, and the fracture behaviour of the material with prestrain can be characterised well by the local approach.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Tianjin University, Weijin Load 92# Tianjin 300072, China
Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072, China
Shanxi Electric Power Research Institute, Shanxi, 030001, China
References (20)
Show source-provided references
1. Fukuda N., Hagiwara N., and Masuda T. ASME J. Offshore Mech. Arct. Eng., 2005, 127, 263–268.10.1115/1.1894405 ↗
2. Hagiwara N., Masuda T., and Oguchi N. ASME J. Pres. Ves. Technol., 2001, 123, 355–361.10.1115/1.1379531 ↗
3. Fukuda N., Yatabe H., Kawaguchi S., Watanabe T., and Masuda T. ASME J. Offshore Mech. Arct. Eng., 2003, 125, 153–157.10.1115/1.1554701 ↗
4. Cosham A. · 2003
5. Leis B. N., Goetz D. P., and Scott P. M.: Proc. 7th Symp. on ‘Line pipe research’, Paper 16, 1–31; 1986, Arlington, VA, American Gas Association.
6. Sivaprasad S., Tarafder S., Ranganath V. R., and Ray K. K. Mater. Sci. Eng. A, 2000, A284, 195 201.10.1016/S0921-5093(00)00739-5 ↗
7. Cosham A. ASME J. Offshore Mech. Arct. Eng., 2001, 123. 182–190.10.1115/1.1408613 ↗
8. Minami F., and Arimochi K. J. Pres. Ves. Technol., 2001, 123, (3), 362–372.10.1115/1.1379532 ↗
9. Beremin F. M. Metall Trans. A. 1983, 14A, 2277–2287.10.1007/BF02663302 ↗
10. Mudry F. Nucl Eng. Design. 1987, 105, (1), 65–76.10.1016/0029-5493(87)90230-5 ↗
11. Minami F., Ohata M., and Toyoda M. J. Soc. Naval Archil. Jpn, 1997, 182, (2), 647–657.10.2534/jjasnaoe1968.1997.182_647 ↗
12. Minami F., Ohata M., and Toyoda M.: Proc. 15th. Conf. on ‘Offshore mechanics arctic engineering’, 193–202; 1996, New York, ASME.
13. Jing H. Y., and Minami F. Pres. Ves. Technol., 1999, 16,(5), 10–13.
14. Jing H. Y., Xu L. Y., Huo L. X., and Zhang Y. F. J. Mater. Sci. Technol., 2004, 20, (I), 113–117.
15. Jing H. Y., Xu L. Y., Huo L. X., and Minami F. J. Mater. Sci. Technol., 2005, 21, (1), 1–4.
16. Minami F., Ruggieri C., Ohata M., and Toyoda M. Soc. Mater. Sci., 1996, 45, (5), 544–551.10.2472/jsms.45.544 ↗
17. Jing H. Y., Xu L. Y., Huo L. X., and Zhang Y. F. Trans. China Weld Inst., 2004, 25, (1), 45 47. 51.
18. ‘Fracture mechanics toughness tests. Part 1: Method for determination of KIC, critical CTOP and J values of metallic materials’, BS 7448, BSI, London. UK, 1991.
19. Minami F., Bruckner-Fiot A., Munz D., and Trolldenier B. Int. J. Fract., 1992, 54, 197–210.10.1007/BF00035355 ↗
20. Gao X.Jr., Dodds R. H., Tregoning R. L., Joyce J. A., and Link R. E. Fatigue Fract. Eng. Mater. Struct., 1999, 22, (6), 481–493.10.1046/j.1460-2695.1999.00202.x ↗