journal article·2015-11

Effect of specimen size in determining ductile to brittle transition temperature

A. Moitra, S. A. Krishnan, G. Sasikala, A. K. Bhaduri, T. Jayakumar

Materials Science and Technology· Volume 31· Issue 14
Publisher page

Abstract

Ductile to brittle transition temperature (DBTT) for 9Cr–1Mo steel has been determined from Charpy impact testing for full size and subsized specimens. DBTT was obtained at various percentage of upper shelf energy (USE). Assuming that most of the energy is spent in crack initiation, notch root volumes of subsized specimens ( VNS) were normalised with full size specimen ( VNF), and a power law relationship between DBTT and notch root volume has been established. From finite element method, it is observed that the sum of von Mises stress (σeq) and hydrostatic stress (σh) reaches ∼2400 MPa (fracture stress, σf*) as the specimen dimension decreases at a temperature corresponding to 33 USE. This corresponds to ∼68 J of full size specimen used in the determination of nil ductility transition temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Metallurgy Group, Materials Development and Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu, India

References (20)

Show source-provided references
1. 10.1016/j.jallcom.2013.03.07210.1016/j.jallcom.2013.03.072 ↗
2. 10.1016/j.jnucmat.2007.03.16010.1016/j.jnucmat.2007.03.160 ↗
3. 10.1016/0022-3115(84)90622-610.1016/0022-3115(84)90622-6 ↗
4. 10.1520/STP33014S10.1520/STP33014S ↗
5. 10.1520/STP33012S10.1520/STP33012S ↗
6. Lucas GE, Odette GR, Sheckherd JW, and Krishnadev M: ‘Recent progress in subsized Charpy impact specimen testing for fusion reactor materials development’, Fusion Technology 10·3, Topical meeting on the technology of fusion energy, 15 Jun 1986, 728, Reno, NV, USA.10.13182/FST86-A24827 ↗
7. 10.1520/STP12720S10.1520/STP12720S ↗
8. 10.1016/0022-3115(88)90391-110.1016/0022-3115(88)90391-1 ↗
9. 10.1520/STP26607S10.1520/STP26607S ↗
10. 10.1016/0022-3115(94)91113-410.1016/0022-3115(94)91113-4 ↗
11. 10.1016/j.jnucmat.2004.04.30710.1016/j.jnucmat.2004.04.307 ↗
12. Moitra A: ‘Ductile brittle transition temperature and dynamic fracture toughness of 9Cr–1Mo steel’, PhD thesis, Banaras Hindu University, Varanasi, India, 2003.
13. 10.1007/s11661-005-0069-410.1007/s11661-005-0069-4 ↗
14. Dieter GE: ‘Mechanical metallurgy (SI metric edition)’; 1988, London, McGraw-Hill Book Company.
15. ASTM-E23: ‘Standard test methods for notched bar impact testing of metallic materials’, ASTM International, West Conshohocken, PA.
16. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
17. 10.1016/S1359-6454(02)00581-510.1016/S1359-6454(02)00581-5 ↗
18. Tetelman AS, and McEvily AJJr: ‘Fracture of structural materials’, 132–139; 1967, New York, John Wiley & Sons Inc.
19. 10.1179/02670830222500610610.1179/026708302225006106 ↗
20. ASME Boiler and Pressure Vessel Code, Section III, Rules for construction of nuclear facility components, Div. 1, ASME, New York, 2010.