Mechanical performance of extruded Ti–46Al–5Nb–1W titanium aluminide
Source abstract
Abstract
Titanium aluminide alloys offer considerable promise for use in high temperature applications, such as gas turbines. In this study an extruded Ti–46Al–5Nb–1W alloy has been examined, in terms of its tensile and creep behaviour. A reasonably fine and uniform microstructure was found in this bar product. This gave excellent properties, with tensile strengths up to ∼950 MPa at room temperature, along with 1 elongation. These properties were accompanied by a very good creep behaviour, with low primary strains at the lower stresses and very low secondary creep rates. Comparison of the creep properties of this titanium aluminide alloy with other similar compositions and some typical nickel alloys shows that it is significantly superior to first generation titanium aluminides but also nickel alloys, such as IN718 and Udimet 720Li. However, the strain controlled fatigue performance of the titanium aluminide alloy was significantly poorer than these same wrought nickel alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
High Tempetature Materials Testing Serco, Technical Consulting Services, Walton House, 404 The Quadrant, Birchwood Park, Risley, Warrington, Cheshire WA3 6GA, UK
Oxford Instruments Halifax Road, High Wycombe HP12 3SE, UK
QinetiQ, A7 Bldg, Cody Technology Park, lvely Road, Farnborough GU14 OLX, UK
Advanced Forming Research Centre , 85 Inchinnan Drive, Inchinnan, Renfrewshine, UK
References (24)
Show source-provided references
1. Colvin JJ: ‘Microstructure and properties of isothermally forged Ti–48Al–2Mn–2Nb’, DRA Report DRA/SMC/WP962268, 1996.
2. 10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
3. 10.1016/j.intermet.2004.12.02110.1016/j.intermet.2004.12.021 ↗
4. Lupinc V, Marchionni M, Nazmy M, Onofrio G, Remy L, Staubli M, Yin WM:‘High temperature mechanical properties evaluation of a γ-TiAl base industrially developed intermetallic alloy’Proc. Conf. on ‘Structural intermetallics’(, Nathal M V, et al.), 515–522; 1997, Warrendale, PA, TMS.
5. Lupinc V, Marchionni M, Nazmy M, Onofrio G, Staubli M, Zhou LZ: ‘Creep, fatigue and crack propagation of a new industrially developed γ-TiAl’, Proc. Conf. Int. Symp. on ‘Structural intermetallics’, 709–716; 2001, Warrendale, PA, TMS.
6. Larsen DE, Bhowal PR, Merrick HF: ‘Creep resistant titanium aluminide alloy’, US Patent no. 5,350,466, 1994.
7. Martin PL, Jain SK, Stucke MA:‘Microstructure and mechanical properties of wrought near-γ-TiAl alloys’Proc. Conf. on ‘Gamma titanium aluminides’(, Kim Y-W, et al.), 727–736; 1995, Warrendale, PA, TMS.
8. Thomas M, Naka S, Khan T:‘On the very high room temperature ductility obtained in B2 and/or O-base titanium aluminides’Proc. Conf. Titanium ’95(, Blenkinsop P A, et al.), 388–395; 1996, London, Institute of Material.
9. 10.1016/0921-5093(94)03291-210.1016/0921-5093(94)03291-2 ↗
10. Kim Y.W, Dimiduk DM:‘Designing gamma TiAl alloys: fundamentals, strategy and production’Proc. Conf. Structural Intermetallics 1997(, Nathal M V, et al.), 531–543; 1997, Warrendale, PA, TMS.
11. Colvin JJ, Hardy MC, Kerry S, Partridge A: ‘Microstructure and mechanical properties of T–48Al–2Mn–2Nb and Ti–47Al–2Mn–2Nb–XD alloys’, DRA Report DRA/SMC/WP972035, 1997.
12. Zhang WJ · Mater. Sci. Eng. A · 2003 · 362 · 28010.1016/S0921-5093(03)00589-6 ↗
13. ‘High temperature, high strength nickel base alloys’; 1997, London, The Nickel Development Institute.
14. Wilcock IM, Cole DG, Brooks JW, Hardy MC: ‘Creep/fatigue behaviour of P/M nickel disc alloy’, Proc. Conf. 6th Int. Charles Parsons Turbine Conf. 2003, 749–764; 2003, London, The Institute of Materials, Minerals and Mining.
15. 10.1016/S0966-9795(02)00226-110.1016/S0966-9795(02)00226-1 ↗
16. Es-Saini M · Acta Metall. Mater. · 1995 · 43 · 153
17. Draper SL, Das G, Locci I, Whittenberger JD, Lerch BA, Kestler H:‘Microstructure and mechanical properties of extruded Gamma Met PX’Proc. Conf. on ‘Gamma titanium aluminides’(, Kim Y-W, et al.), San Diego, CA, 207–212; 2003, Warrendale, PA, TMS.
18. Evans RW, Wilshire B: ‘Creep of metals’, 121; 1985, London, Institute of Metals.
19. 10.1016/S1359-6454(99)00021-X10.1016/S1359-6454(99)00021-X ↗
20. Monkman FC, Grant NJ: ‘An empirical relationship between rupture life and minimum creep rate in creep rupture tests’, Proc. 59th Annual Meeting of ASTM, Philadelphia, PA, USA, 1956, ASTM, 593–605.
21. 10.1016/S0966-9795(03)00116-X10.1016/S0966-9795(03)00116-X ↗
22. Reed PAS, Everitt S, Wisbey A, Di Martino I, Brooks JW: ‘High temperature fatigue and creep performance of N18 alloy’, Proc. Conf. Parsons 2007, Glasgow, UK, September 2007, Strathclyde University, 309–319.
23. 10.1016/j.intermet.2006.09.00310.1016/j.intermet.2006.09.003 ↗
24. 10.1179/02670830010150774910.1179/026708300101507749 ↗