journal article·2013-05

Microstructure evolution during novel rheorolling process for producing A356 alloy strip

R G Guan, Z Y Zhao, X Wang, C S Lee, C M Liu

Materials Science and Technology· Volume 29· Issue 5
Publisher page

Abstract

Microstructure evolution during a novel rheorolling process for producing A356 alloy strip was investigated. Under the high cooling rate caused by the sloping plate and stirring action caused by the vibration and metal flow, high nucleation rate and dendrite breakage happened during the process, which causes the formation of fine spherical or rosette primary grains. The grain size of the primary α-Al phase decreased with the decrease in casting temperature in the cooling slope, but the volume fraction of the primary α-Al phase increased. The change of the primary grain shape is not obvious in the roll gap during the rolling process, and most of the primary grains nearly kept round or rosette shapes. When the casting temperature is 660°C, the strip with a cross-section of 4×160 mm was produced, and homogeneous microstructure was obtained.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials and Metallurgy, Northeastern University, Shenyang 110819, China

Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784, Korea

References (26)

Show source-provided references
1. 10.1007/s11663-001-0059-x10.1007/s11663-001-0059-x ↗
2. 10.1016/j.jmatprotec.2007.06.07910.1016/j.jmatprotec.2007.06.079 ↗
3. 10.1016/S0924-0136(02)00765-310.1016/S0924-0136(02)00765-3 ↗
4. Haga T · Adv. Mater. Res. · 2009 · 97 · 1057
5. 10.1016/j.jmatprotec.2004.04.01810.1016/j.jmatprotec.2004.04.018 ↗
6. 10.1016/j.jallcom.2010.04.17310.1016/j.jallcom.2010.04.173 ↗
7. 10.1016/S0921-5093(01)01832-910.1016/S0921-5093(01)01832-9 ↗
8. 10.1179/026708310X1281599241801210.1179/026708310X12815992418012 ↗
9. Watanabe H · J. Mater. Sci. Lett. · 2004 · 39 · 1477
10. 10.1016/j.matdes.2012.04.02910.1016/j.matdes.2012.04.029 ↗
11. Kapranos P · Diffus. Defect Data B · 2008 · 141 · 115
12. Grimmig T · Diffus. Defect Data B · 2006 · 116 · 484
13. Babaghorbani P · Diffus. Defect Data B · 2006 · 116 · 205
14. 10.1007/s11663-010-9451-810.1007/s11663-010-9451-8 ↗
15. 10.1016/S1003-6326(09)60353-810.1016/S1003-6326(09)60353-8 ↗
16. Mehrara H · Diffus. Defect Data B · 2008 · 141 · 785
17. Yang SM, Tao WQ: ‘Heat transfer’, 4; 2006, Beijing, Higher Education Press.
18. Guan RG · Acta Metall. Sin. · 2012 · 25 · 320
19. 10.1007/s10853-008-2829-110.1007/s10853-008-2829-1 ↗
20. 10.1179/174328407X16891910.1179/174328407X168919 ↗
21. 10.1016/j.jmatprotec.2008.06.00710.1016/j.jmatprotec.2008.06.007 ↗
22. 10.1016/S0025-5408(97)00199-210.1016/S0025-5408(97)00199-2 ↗
23. Li Y · Chin. Phys. Lett. · 2011 · 28 · 1
24. Kim KS · J. Kor. Inst. Met. Mater. · 2000 · 38 · 529
25. 10.1016/S0921-5093(00)01373-310.1016/S0921-5093(00)01373-3 ↗
26. Guan RG · J. Mater. Process. Technol. · 2009 · 25 · 395