journal article·2010-06

Dynamic recrystallisation in aluminium alloyed hypereutectoid steels under hot working conditions

M. P. Phaniraj, Y. S. Jang, D.-I. Kim, J.-H. Shim, C. Y. Lee, D. L. Lee

Materials Science and Technology· Volume 26· Issue 6
Publisher page

Abstract

Hot deformation behaviour of hypereutectoid steels (0·83–0·92%C) alloyed with 0–2%Al is investigated. Compression tests were carried out in the temperature range 1000–1100°C at 0·1–10 s–1 strain rates. The stress–strain curves are analysed using work hardening rate flow stress plots to determine the critical and peak stress and the corresponding strains associated with dynamic recrystallisation. The addition of Al increases the strain hardening rate and lowers the peak strain. There is an optimum content beyond which peak strain increases with Al addition. Phase diagram calculations show that the multiphase microstructure present during deformation is responsible for the non-linear effect of Al. The steady state stress is modelled using the sine hyperbolic constitutive equation, and the activation energy for deformation is determined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science and Technology Research DivisionKorea Institute of Science and Technology, Wolsong-Gil 5, Seongbuk-gu, Seoul 136-791, Korea

Materials Science and Technology Research DivisionKorea Institute of Science and Technology, Wolsong-Gil 5, Seongbuk-gu, Seoul 136-791, Korea, Department of Materials Science and Engineering, Korea University, 5-1 Anam-dong, Seongbuk-gu, Seoul 136-713, Korea

Materials Science and Technology Research DivisionKorea Institute of Science and Technology, Wolsong-Gil 5, Seongbuk-gu, Seoul 136-791, Korea;, Email: dongikkim@kist.re.kr

Technical Research LabPOSCO, 1, Goedong-dong, Nam-gu, Pohangsi, Gyeongbuk 790-785, Korea

References (29)

Show source-provided references
1. Taleff E. M., Lewandowski J. J., and Pourladian B.: J. Met., July 2002, 25–30.10.1007/BF02700982 ↗
2. Sherby O. D., and Oyama T.: US patent 4,533,390, 1985.
3. Sherby O. D., Kum D. W., Oyama T., and Wadsworth J.: US patent 4,769,214, 1988.
4. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
5. Imbert C. A. C., and McQueen H. J.: Mater. Sci. Eng. A, 2001, A313,88–103.10.1016/S0921-5093(01)00976-5 ↗
6. McQueen H. J., and Ryan N. D.: Mater. Sci. Eng. A, 2002, A322,43–63.10.1016/S0921-5093(01)01117-0 ↗
7. Stewart G. R., Jonas J. J., and Montheillet F.: ISIJ Int. 2004, 44, 1581–1589.10.2355/isijinternational.44.1581 ↗
8. Jonas J. J.: Mater. Sci. Eng. A, 1994, A184,155–165.10.1016/0921-5093(94)91028-6 ↗
9. Maccagno T. M., Jonas J. J., and Hodgson P. D.: ISIJ Int. 1996, 36, 720 — 728.10.2355/isijinternational.36.720 ↗
10. Sellars C. M. ‘Physical metallurgy of hot working’, Proc. Int. Conf. on ‘Hot working and forming processes’, 3-15; 1980, London, The Metals Society,
11. Hodgson P. D., and Gibbs R. K.: ISIJ Int. 1992, 32, 1329 — 1338.10.2355/isijinternational.32.1329 ↗
12. Medina S. F., and Hernandez C. A.: Acta Mater. 1996, 44, 149–154.10.1016/1359-6454(95)00152-2 ↗
13. McQueen H. J., Imbert C. A. C., and Sherby O. D.: Mater. Sci. Forum, 2003, 426-432,865–870.10.4028/www.scientific.net/MSF.426-432.865 ↗
14. Bae C. M., Elwazri A. M., Lee D. L., and Yue S.: ISIJ Int. 2007, 47, 1633–1637.10.2355/isijinternational.47.1633 ↗
15. Elwazri A. M., Wanjara P., and Yue S.: Mater. Sci. Eng. A, 2003, A339,209–215.10.1016/S0921-5093(02)00164-8 ↗
16. Voort G. F. V. ‘Metallography: principles and practice'; 1984, New York, NY, McGraw-Hill Book Company.
17. 10.1179/026708306X8147810.1179/026708306X81478 ↗
18. 10.1016/0924-0136(90)90005-F10.1016/0924-0136(90)90005-F ↗
19. Poliak E. I., and Jonas J. J.: ISIJ Int. 2003, 43, 684–691.10.2355/isijinternational.43.684 ↗
20. Sellars C. M. · Mem. Sci. Rev. Met · 1966 · 63 · 731
21. Courtney T. H. ‘Mechanical behavior of materials’; 2000, Singapore, McGraw-Hill.
22. Lesuer D. R., Syn C. K., Whittenberger J. D., Carsi M., Ruano O. A., and Sherby O. D.: Mater. Sci. Eng. A, 2001, A317,101–107.10.1016/S0921-5093(01)01167-4 ↗
23. 10.1016/j.actamat.2006.04.01310.1016/j.actamat.2006.04.013 ↗
24. Hamada A. S., Karjalainen L. P., and Somani M. C.: Mater. Sci. Eng. A, 2007, A467,114–124.10.1016/j.msea.2007.02.074 ↗
25. McQueen H. J. · Metall Mater. Trans. A · 2002 · 3310.1007/s11661-002-0096-3 ↗
26. Poliak E. I., and Siciliano F.: Proc. Mater. Sci. Technol. Conf., New Orleans, LA, USA, 2004, The Minerals, Metals & Materials Society and The Association for Iron & Steel Technology, 39 — 45.
27. Poliak E. I., and Jonas J. J.: Acta Mater. 1996, 44, 127 — 136.10.1016/1359-6454(95)00146-7 ↗
28. 10.1007/s11661-000-0254-410.1007/s11661-000-0254-4 ↗
29. 10.1007/s11661-002-0026-410.1007/s11661-002-0026-4 ↗