journal article·2010-09

Deformation characteristics of fine grained magnesium alloy AZ31B thin sheet during rapid gas blow forming

P.-H. Sun, H.-Y. Wu, W.-C. Hsu, H.-H. Tsai, C.-C. Huang, S. Lee

Materials Science and Technology· Volume 26· Issue 9
Publisher page

Abstract

Decreasing the forming time in gas blow forming using fine grained Mg alloy AZ31B thin sheet with a thickness of 0·6 mm was studied in this work. Tensile tests and gas blow forming using stepwise pressurisation profiles were performed to explore the deformation behaviour of a fine grained AZ31B Mg alloy sheet. The alloy sheets were successfully deformed into hemispherical domes using two proposed stepwise pressurisation profiles during gas blow forming. As a result, significant reduction in forming time was achieved. Maximum effective deformation rates of 1·02 × 10–2 and 1·98 × 10–2 s–1 were obtained at 300 and 370°C respectively. It was feasible to form a hemispherical dome with a height of 20 mm in less than 80 s at 370°C. The results confirmed that the thickness distribution along the centreline of the formed dome was sensitive to the pressurisation profiles. A higher thinning effect was observed at 370°C due to the higher deformation rate imposed during forming. Grain growth was not a serious problem for forming even at 370°C, and static grain growth should be the major factor resulting in grain growth during forming.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical EngineeringNational Central University, 300, Jhongda Rd, Jhongli, Taoyuan 320, Taiwan

Department of Mechanical EngineeringChung-Hua University, 707, Sec. 2, Wufu Rd, Hsinchu 300, Taiwan;, Email: ncuwu@chu.edu.tw

Department of Mechanical EngineeringChung-Hua University, 707, Sec. 2, Wufu Rd, Hsinchu 300, Taiwan

References (33)

Show source-provided references
1. 10.1016/1044-5803(95)00063-110.1016/1044-5803(95)00063-1 ↗
2. 10.2320/matertrans.42.115410.2320/matertrans.42.1154 ↗
3. 10.2320/matertrans.42.116010.2320/matertrans.42.1160 ↗
4. 10.4028/www.scientific.net/MSF.546-549.1110.4028/www.scientific.net/MSF.546-549.11 ↗
5. 10.4028/www.scientific.net/MSF.488-489.910.4028/www.scientific.net/MSF.488-489.9 ↗
6. 10.1016/S0924-0136(01)00760-910.1016/S0924-0136(01)00760-9 ↗
7. 10.1016/j.msea.2007.05.10910.1016/j.msea.2007.05.109 ↗
8. 10.1016/j.msea.2007.02.02710.1016/j.msea.2007.02.027 ↗
9. 10.1016/j.matlet.2005.01.05310.1016/j.matlet.2005.01.053 ↗
10. 10.1016/S1359-6462(02)00101-X10.1016/S1359-6462(02)00101-X ↗
11. 10.1007/s11665-007-9031-510.1007/s11665-007-9031-5 ↗
12. 10.1016/j.msea.2007.05.01210.1016/j.msea.2007.05.012 ↗
13. 10.1016/j.msea.2006.01.17010.1016/j.msea.2006.01.170 ↗
14. Ma K. · Acta Mater · 2004 · 52 · 2894
15. TrojanovaL Z. · Mater. Sci. Eng. A · 2005 · 410
16. Cheng Y, Q. · Mater. Process. Technol · 2008 · 208 · 34
17. Yin D. Y. · Trans. Nonferr. Met. Soc. Chin · 2004 · 1100 · 1105
18. Kim W. J. · Alloys Compd · 2008 · 464 · 204
19. Blandin J. J. · Mater. Sci. Forum · 2007 · 552 · 217
20. Chung S. W., Higashi K., and Kim W. J.: Mater. Sci. Eng. A, 2004,
21. 10.1007/s11661-005-0235-810.1007/s11661-005-0235-8 ↗
22. Kim W. J., Chung S. W., Chung C. S., and Kum D.: Acta Mater. 2001, 49, 3337–3345.10.1016/S1359-6454(01)00008-8 ↗
23. Kim H. K. · J. Mater. Sc
24. Watanabe H., Mukai T., Kohzu M., Tanabe S., and Higashi K.: Acta Mater. 1999, 47, 3753–3758.10.1016/S1359-6454(99)00253-0 ↗
25. 10.1016/S0921-5093(02)00097-710.1016/S0921-5093(02)00097-7 ↗
26. 10.1007/BF0258610610.1007/BF02586106 ↗
27. 10.1007/s11661-005-0217-x10.1007/s11661-005-0217-x ↗
28. 10.2320/matertrans.44.48410.2320/matertrans.44.484 ↗
29. Wittenauer J. · Mater. Sci. Eng. A · 1994 · 194 · 6910.1016/0921-5093(94)09650-3 ↗
30. Hamilton C. H. ‘Superplasticity’, AGARD lecture series no. 154, 2-1-2-23; 1987, London, Specialised Printing Services.10.1093/hwj/23.1.154 ↗
31. 10.1080/1042691950893504210.1080/10426919508935042 ↗
32. 10.1007/BF0265839110.1007/BF02658391 ↗
33. Hamilton C. H. · Proc. Symp. on ‘Superplasticity in aerospace’, Phoenix, AZ, USA, January 1988, The Metallurgical Society, · 29