journal article·2008-01

Deformation behaviour in superplastic 5083 Al alloy during biaxial gas pressure forming with lubrication

H.-H. Chen, H.-Y. Wu, W.-S. Lee, S. Lee

Materials Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

Effect of lubrication on deformation behaviour of a superplastic material has been given little attention, although it is important for industrial application. In this paper, a superplastic 5083 Al alloy under biaxial deformation was investigated by deforming the sheet into a cylindrical die cavity with and without lubrication. Several interrupted tests were performed to bulge the sheets to various depths for two different strain rates, the formed parts were then utilised to evaluate the effect of lubrication on metal flow, thickness distribution and cavitation. It was found that reducing the interfacial friction by use of a lubricant improved the metal flow after the deformed sheet had made contact with the bottom surface of die. Changes of the metal flow during forming not only developed a better thickness distribution of the formed part, but also reduced cavitation levels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Zelin M. G., Guillard S., and Chaudhury P. K.: Proc. Conf. on ‘Superplasticity in advanced materials’, Bangalore, India, January 1997, Trans Tech Publications,137–142.10.4028/www.scientific.net/MSF.243-245.137 ↗
2. Chockalingam K. S. K. · J. Mater. Sc
3. 10.1016/0025-5416(86)90228-410.1016/0025-5416(86)90228-4 ↗
4. Stowell M. J.: Metal Sci. 1983, 17, 92–98.10.1179/030634583790427586 ↗
5. 10.1016/0001-6160(86)90182-310.1016/0001-6160(86)90182-3 ↗
6. Pilling J., and Ridley N. ‘Superplasticity in crystallines solids’, 102-158; 1989, London, The Institute of Metals.
7. Hales S. J., Bales T. T., James W. F., and Shinn J. M.: Proc. Conf. on ‘Superplastcity in aerospace II’, Anaheim, CA, USA, February 1990, TMS,167–185.
8. Chokshi A. H.: Mater. Sci. Eng. A, 2005, A410—A411,95–99.10.1016/j.msea.2005.08.069 ↗
9. Nicolaou P. D., and Semiatin S. L.: Acta Mater. 2003, 51, 613–623.10.1016/S1359-6454(02)00441-X ↗
10. 10.1016/S1359-6462(03)00427-510.1016/S1359-6462(03)00427-5 ↗
11. 10.4028/www.scientific.net/MSF.475-479.293110.4028/www.scientific.net/MSF.475-479.2931 ↗
12. Bae D. H. · Metall Mater. Trans. A · 2003 · 34 · 44910.1007/s11661-003-0081-5 ↗
13. 10.1016/S0924-0136(00)00427-110.1016/S0924-0136(00)00427-1 ↗
14. Stowell M. J., Livesey D. W., and Ridley N.: Acta Metall. 1984,32, 35–42.10.1016/0001-6160(84)90199-8 ↗
15. Cocks A. C. F., and Ashby M. F.: Metal Sci. 1982, 16, 465–474.10.1179/msc.1982.16.10.465 ↗
16. 10.1016/S0921-5093(02)00848-110.1016/S0921-5093(02)00848-1 ↗
17. 10.1007/BF0265732910.1007/BF02657329 ↗
18. 10.1007/BF0265438510.1007/BF02654385 ↗
19. 10.1007/BF0264958510.1007/BF02649585 ↗
20. 10.1016/S0924-0136(03)00867-710.1016/S0924-0136(03)00867-7 ↗
21. Pilling J., and Ridley N.: Proc. Conf. on ‘Superplastcity in aerospace’, Phoenix, AZ, USA, January 1988, The Metallurgical Scoiety,183–198.
22. 10.1016/j.msea.2006.04.10210.1016/j.msea.2006.04.102 ↗
23. CEMEF, SUPFORM 2 User's guide, Version 1.0, 1989, Fcole des Mines de Paris.
24. Optimas Corporation, Optimas 5 Software, 6th edition, 1995, P.O. Box 24467, Seattle, Washington98124–0467.
25. Gary R. J., and Vander Voort G. F.: in ‘Metals handbook’, (ed.Boyer H. E.), Desk edition, 35.16-35.17; 1985, Metals Park, OH, American Society for Metals.
26. Wu H. Y. · Mater. Sci. Eng. A · 2000 · 291 · 110.1016/S0921-5093(00)00986-2 ↗
27. 10.1179/mst.1989.5.11.110910.1179/mst.1989.5.11.1109 ↗