journal article·2002-12

Tungsten inert gas surface modification of SAE 4140 steel

M. Eroglu, S. Önalp

Materials Science and Technology· Volume 18· Issue 12
Publisher page

Abstract

In the present study, the surface of SAE 4140 steel was separately arc melted and alloyed with preplaced high carbon ferrochromium powder using a tungsten inert gas (TIG) arc heat source. The effects of specimen thickness and heat input for arc melting and thickness of preplaced high carbon ferrochromium powder layer for surface alloying on the microstructure, hardness and wear properties of the modified surfaces were investigated. Following arc melting and surface alloying, conventional characterisation techniques such as optical microscopy, scanning electron microscopy (SEM), energy dispersive spectrography (EDS) and X-ray diffraction were employed to study the microstructure of the arc melted and alloyed surfaces. Hardness measurements were performed across the modified zones and wear properties of the surfaces were evaluated by a pin-on-disc abrasive wear testing method. The results indicated a significant increase in surface hardness after melting at low heat input (0.7 kJ mm -1 ) and alloying with a preplaced high carbon ferrochromium powder layer giving a surface composition of 3%C and 25.8%Cr, with higher wear resistance surfaces. This was attributed to the fully martensitic microstructure for surface melting and the high volume friction of Cr 7 C 3 carbides in the matrix of austenite for surface alloying.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. DAVIS J. R.: in ‘ASM handbook’ Vol. 6 ‘Welding brazing and soldering’ 787-799; 1993 Materials Park OH ASM International.
2. LI X. Y.: Surf Eng. 2001 17 147 — 152.10.1179/026708401101517746 ↗
3. 10.1016/S0921-5093(99)00584-510.1016/S0921-5093(99)00584-5 ↗
4. 10.1016/S0257-8972(98)00793-210.1016/S0257-8972(98)00793-2 ↗
5. 10.1007/s11666-999-0001-310.1007/s11666-999-0001-3 ↗
6. 10.1016/0043-1648(95)80043-310.1016/0043-1648(95)80043-3 ↗
7. 10.1023/A:100485850827410.1023/A:1004858508274 ↗
8. 10.1016/S0043-1648(00)00381-110.1016/S0043-1648(00)00381-1 ↗
9. LIMA M. S. F. and GOLDENSTEIN H.: Surf Eng. 2000 16 127–130.10.1179/026708400101517017 ↗
10. 10.1016/S0043-1648(99)00254-910.1016/S0043-1648(99)00254-9 ↗
11. 10.1016/0257-8972(94)02263-P10.1016/0257-8972(94)02263-P ↗
12. 10.1016/S0257-8972(98)00674-410.1016/S0257-8972(98)00674-4 ↗
13. 10.1016/S0043-1648(96)07339-510.1016/S0043-1648(96)07339-5 ↗
14. 10.1016/S0301-679X(99)00087-010.1016/S0301-679X(99)00087-0 ↗
15. MRIDHA S. and NG B. S.: Surf Eng. 1999 15 210–215.10.1179/026708499101516533 ↗
16. EASTERLING K. E.: ‘Introduction to the physical metallurgy of welding’; 1992 London Butterworth-Heinemann.
17. PERO-SANZ J. A., , PLAZ D., , WERDEJA J. I., , and ASENSIO J.: Mater. Charact., 1999, 43, 33 — 39.
18. 10.1016/S0924-0136(00)00550-110.1016/S0924-0136(00)00550-1 ↗
19. 10.1016/S0043-1648(00)00523-810.1016/S0043-1648(00)00523-8 ↗
20. RICHARD R. B. and DOANE D. V.: in ‘ASM handbook’ Vol. 4 ‘Heat treating’ 703-705; 1993 Materials Park OH ASM International.
21. 10.1023/A:100475551121410.1023/A:1004755511214 ↗
22. 10.1016/S1044-5803(97)00142-310.1016/S1044-5803(97)00142-3 ↗
23. 10.1007/s11661-997-0267-310.1007/s11661-997-0267-3 ↗
24. 10.1007/s11661-001-0068-z10.1007/s11661-001-0068-z ↗
25. 10.2320/matertrans1989.33.117110.2320/matertrans1989.33.1171 ↗
26. GLAESER W. A.: in ‘ASM handbook’ Vol. 18 ‘Friction lubrication and wear technology’ 705; 1999 Materials Park OH ASM International.
27. TURENNE S.: J. Mater. Sci., 1984, 24, 3021 —3028.
28. 10.1016/S0043-1648(96)07390-510.1016/S0043-1648(96)07390-5 ↗