journal article·2003-06

Effect of consolidating temperature on strengthening mechanism in Fe–Cu alloy from rapidly solidified powder

H. Kakisawa, K. Minagawa, T. Kimura, K. Halada

Materials Science and Technology· Volume 19· Issue 6
Publisher page

Abstract

The strengthening mechanism of Fe-Cu alloy manufactured from rapidly solidified powder was investigated. Powders of Fe-Cu with copper content ranging from 0.5 to 5 wt-% were prepared by high pressure water atomisation and consolidated by groove rolling at 973, 1073 or 1273 K. Analysis by X-ray diffraction (XRD) and electron probe microanalysis (EPMA) were carried out to evaluate the resulting structures. The microstructures were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Yield stress under tensile loading and hardness after aging were measured. The copper states in consolidated specimens were determined based on the results, and the states were correlated to the mechanical properties of the specimens. At each of the consolidating temperatures, the yield stress increased with an increase in copper content. However, the strengthening mechanism differed according to the temperature. Specimens consolidated at 973 and 1073 K were strengthened by microstructure refinement,whereas precipitation hardening was the main strengthening mechanism in specimens consolidated at 1273 K.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 10.1063/1.173515610.1063/1.1735156 ↗
2. 10.1179/pom.1980.23.2.8610.1179/pom.1980.23.2.86 ↗
3. 10.1007/BF0264287810.1007/BF02642878 ↗
4. 10.1007/s11661-997-1018-110.1007/s11661-997-1018-1 ↗
5. 10.1007/s11661-998-0104-310.1007/s11661-998-0104-3 ↗
6. 10.1016/0965-9773(96)00003-710.1016/0965-9773(96)00003-7 ↗
7. 10.1007/BF0267126210.1007/BF02671262 ↗
8. HORNBOGEN E., and GLENN R. C.: Trans AIME, 1960, 218, 1064.
9. 10.1016/0001-6160(72)90091-010.1016/0001-6160(72)90091-0 ↗
10. 10.1007/BF0266937610.1007/BF02669376 ↗
11. 10.1016/0022-3115(87)90525-310.1016/0022-3115(87)90525-3 ↗
12. 10.2355/isijinternational.34.35910.2355/isijinternational.34.359 ↗
13. TOMITA Y. HAZE T. SAITO N. TSUZAKI T. TOKUNAGA Y. and OKAMOTO K.: ISIJ Int. 1994 34 836.10.2355/isijinternational.34.836 ↗
14. MINAGAWA K. KAKISAWA H. OKUYAMA H. OTAGUCHI M. and HALADA K.: Proc. 2000 Powder Metallurgy World Cong. (ed. Kosuge K. and Nagai H.) 218; 2000 Kyoto Japan. Society for Powder and Powder Metallurgy.
15. KAKISAWA H., , MINAGAWA K., , OTAGUCHI M., and HALADA K.: Mater. Trans., JIM, 2002, 43, 301.
16. BRIGHT D. S., and NEWBURY D. E.: Anal. Chem., 1991, 63, 243A.
17. 10.1016/S0167-577X(02)01111-410.1016/S0167-577X(02)01111-4 ↗
18. TAKAHASHI A. and IINO M.: ISIJ Int. 1996 36 241.10.2355/isijinternational.36.241 ↗
19. 10.1080/1478643620820185710.1080/14786436208201857 ↗
20. MORRISON W. B.: ASM Trans. 1966 59 824.10.1177/003591576605900909 ↗