journal article·2010-08

Three-dimensional thermomechanical coupled FEM analysis of static recrystallisation during two-pass tube tension reducing process

F. Z. Wang, H. C. Zhang, X. Z. An, G. Q. Liu, L. Lu, G. Y. Zhu

Materials Science and Technology· Volume 26· Issue 8
Publisher page

Abstract

In this paper, a thermal dynamic numerical method was carried out to model the austenite static recrystallisation behaviour of steel 33Mn2V used in new non-quenched/tempered oil well tubes at different deformation temperatures, strain rates, deformation amounts and initial microstructures. Based on the MARC/AutoForge software, a three-dimensional thermomechanical coupled elastoplastic finite element model (FEM) was applied to simulate static recrystallisation amount of the two-pass tube tension reducing process of steel 33Mn2V for oil well. The distribution law of static recrystallisation inside the workpiece is analysed. It is indicated that the simulation results are much reliable through comparison with experimental data.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of PhysicsTianjin Polytechnic University, Tianjin 300160, China;, Email: wangfuzhong@163.com

Department of PhysicsTianjin Polytechnic University, Tianjin 300160, China

School of Materials and MetallurgyNortheastern University, Shenyang 110004, China

School of Materials Science and EngineeringUniversity of Science and Technology Beijing, Beijing 100083, China

Wuxi Seamless Steel Tube Co., Ltd, Wuxi 214026, China

References (12)

Show source-provided references
1. Ai J. H. · J. Univ. Sci. Technot Being · 2004 · 11 · 343
2. Wang F. Z. · J. Mech. Eng · 2008 · 54 · 219
3. Liu S. X. · Iron Steel · 2003 · 38 · 38
4. Humphrey F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena’, Chapters 4 and 9; 1995, Oxford, Pergamon Press.10.1016/B978-0-08-041884-1.50017-9 ↗
5. Barraclough D. R., and Sellars C. M. ‘Static recrystallization and restoration after hot deformation of type 304 stainless steel’, Met. Sci,1979, (13), 257–267.10.1179/msc.1979.13.3-4.257 ↗
6. Yu Y. N., and Liu G. Q. ‘Stereology: principle and application of quantitative analysis of microstructure’, 35-45; 1989, Beijing, The Metallurgical Industry.
7. Li G., Maccagno T. M., Bai D. Q., and Jonas J. J. ‘Effect of initial grain size on the static recrystallization kinetics of Nb microalloyed steels’, ISIJ Int. 1996, 36, 1479–1485.10.2355/isijinternational.36.1479 ↗
8. Andrade H. L., Akben M. G., and Jonal J. J. ‘Effect of molybdenum, niobium, and vanadium on static recover and recrystallization and on solute strengthening in microalloyed steels’, Metall Trans. 1983, 14A, 1976–1977.10.1007/BF02662364 ↗
9. Anelli E. ‘Application of mathematical modeling to hot rolling and controlled cooling of wire rods and bars’, ISIJ Int. 1992, 32, 440 446.10.2355/isijinternational.32.440 ↗
10. Dyja H. · Scand J. Metall · 1998 · 27 · 143
11. 10.2355/isijinternational1966.25.114610.2355/isijinternational1966.25.1146 ↗
12. Pietrzyk M., Kedzierski Z., and Kusiak H. ‘Evolution of the micro-structure in the hot rolling process’, Steel Res. 1993, 64, 549–556.10.1002/srin.199301570 ↗