Shear test parameters for brittle fracture of flip chip solder joint
Source abstract
Abstract
Compared to conventional Sn-Pb solder, ternary Pb free solder alloys are particular susceptible to brittle fracture through the formation of intermetallic compound layers. However, the conventional shear test of the solder ball joint has been reported to be inappropriate for confirming the susceptibility to brittle fracture of ball grid array solder joints. In this study, we investigated the effects of two shear test parameters, the shear height and shear speed to determine the optimum shear conditions for the brittle fracture of flip chip solder joints. The solder composition and process used in this study were Sn-3·0Ag-0·5Cu and low cost bumping with electroless nickel immersion gold followed by solder paste screen printing. Increasing shear height, at a fixed shear speed, decreased the shear force, whereas increasing the shear speed, at a fixed shear height, increased the shear force. The experimental and computational simulation results indicated that a low shear height and high shear speed improve the bonding force and are generally more appropriate for the brittle fracture of flip chip solder joints. The failure mechanisms were discussed in terms of the von Mises stresses and equivalent plastic strain distributions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Advanced Materials Science and Engineering, Sungkyunkwan University, 300 Cheoncheon dong, Jangan gu, Suwon 440 746, Korea
References (26)
Show source-provided references
1. Lau J. H. ‘Ball grid array technology’; 1995, New York, McGraw-Hill.
2. Gilleo K. ‘Area array package handbook’; 2002, New York, McGraw-Hill.
3. Lau J. H. ‘Low cost flip chip technologies for DCA. WLCSP, and PBGA assemblies’; 2000, New York, McGraw-Hill.
4. Lau J. H. ‘Flip chip technologies’; 1995, New York, McGraw- Hill.
5. Lau J. H., and Pao Y. H. ‘Solder joint reliability of BGA, CSP, flip chip, and fine pitch SMT assemblies’; 1997, New York, McGraw-Hill.
6. Kloeser J., Coskina P., Aschenbrenner R., and Reicht H. Microelectron. Reliab., 2002, 42, 391–398.10.1016/S0026-2714(01)00223-2 ↗
7. Kloeser J., Heinricht K., Jung E., Lauter L., Ostmann A., and Aschenbrenner R. Microelectron. Reliab., 2000, 40, 497–505.10.1016/S0026-2714(99)00237-1 ↗
8. Pang J. H. L., and Chong D. Y. R. IEEE Trans. Adv. Packag., 2001, 24, 499–506.10.1109/6040.982836 ↗
9. Lee T. Y., Tu K. N., and Frear D. R. J. Appl. Phys., 2001, 90, 4502–4508.10.1063/1.1400096 ↗
10. Lee S. W. R., and Huang X. Solder. Surf. Mount Technol., 2002, 14. 45–48.10.1108/09540910210416468 ↗
11. Hung S. C., Zheng P. J., Lee S. C., and Lee J. J.: Proc. 24th Int. Symp. on ‘Electronics manufacturing technology’, Austin, TX, USA, October 1999. IEEE, 7–18.
12. Lee K. Y., Lo M., and Olsen D. R.: Proc. 51st Conf. on ‘Electronic components and technology’, Orlando, FL, USA, May-June 2001, IEEE, 478–485.
13. Huang X., Lee S. W. R., and Yan C. C.: Proc. 52nd Conf. on ‘Electronic components and technology”, San Diego, CA. USA, May 2002, IEEE, 968–973.
14. Erich R., Coyle R. J., and Wenger G. M.: Proc. 24th Int. Symp. on ‘Electronics manufacturing technology’, Austin, TX, USA, October 1999, IEEE. 16–22.
15. JESD 22-B117A: JEDEC Solid State Technology Association, 2006.
16. Kim J. W., Kim D. G., and Jung S. B. Microelectron. Reliab, 2006, 46, 535–542.10.1016/j.microrel.2005.06.008 ↗
17. Sakai H., Nishimura K., Motegi M., and Sakuyama S.: Proc. 8th Symp. on ‘Microjoining and assembly technology in electronics”, Yokohama, Japan, 2002, Japan Welding Society, 443–448.
18. Kim K. S., Huh S. H., and Suganuma K. J. Alloys Compd, 2003, 352, 226–236.10.1016/S0925-8388(02)01166-0 ↗
19. Lee C. B., Jung S. B., Shin Y. E., and Shur C. C. Mater. Trans., 2002, 43, 1858–1863.10.2320/matertrans.43.1858 ↗
20. Shiau L. C., Ho C. E., and Kao C. R. Solder. Surf Mount TechnoL, 2002, 14, 25–29.10.1108/09540910210444692 ↗
21. Dieter G. E. ‘Mechanical metallurgy’; 1998, New York. McGraw-Hill.
22. Nadai A. ‘Theory of flow and fracture of solids’; 1950, New York, McGraw-Hill.
23. Johnson G. R., and Cook W. H.: Proc. 7th Int. Symp. on ‘Ballistics’, The Hague, The Netherlands, April 1983, International Ballistic Committee, 541–549.
24. Bodner S. R., and Partom Y. J. J. Appl Mech., 1975, 42, 385.10.1115/1.3423586 ↗
25. Zerilli F. J. · 1987 · 51
26. Symmonds P. S. ‘Behaviour of materials under dynamic loading’, 106–124; 1965, New York. ASME.