Textures and microstructures in duplex stainless steel
Source abstract
Abstract
The textures of austenite and ferrite in a duplex steel X2CrNiMoN225 were studied via X-ray and electron diffraction. This latter method was also used to determine the orientation difference distribution of grains and phase boundaries. The mechanical properties, e.g. hardness, microhardness, ultimate tensile strength, etc. were also measured. It was found that the hot rolled material was only partially recrystallised. Even after annealing at 1030°C the austenitic phase was not fully recrystallised. In addition, no change in texture was observed after aging in the two embrittlement ranges. Tensile deformation changed both textures due to plastic deformation in the two phases. During deformation at 45° to the rolling direction, rigid rotation of the phase particles may have contributed to the observed texture changes. The grain boundary distribution function revealed a large amount of low angle boundaries in both phases.MST/1396
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. 1988 · 7 · 23110.1155/TSM.7.231 ↗
2. 1949 · 41 · 1030
3. 1985 · 1 · 72810.1179/mst.1985.1.9.728 ↗