journal article·2017-06

Precipitation behaviour during creep in 10%Cr steel for turbine rotors

M. Mikami

Materials Science and Technology· Volume 33· Issue 9
Publisher page

Abstract

To reveal the precipitation behaviour in relation to creep deformation, microstructural investigation on the specimens creep-ruptured and creep-interrupted at various time under 600°C and 120 MPa was conducted in a 10%Cr steel forging. M 23 C 6 carbides, Cr-rich M 2 X and V-rich VX carbonitrides are detected on the heat-treated specimen. Most of the precipitates are M 23 C 6 carbides and the recovery of the martensitic lath microstructure during creep are suppressed by them. There is a good relationship between the carbides growth and the creep deformation behaviour: the beginning of the significant coarsening corresponds to the transition from the primary to acceleration creep. The creep deformation is not affected by the precipitation of Laves phase and VX carbonitrides present around the grain boundaries. This paper is part of a thematic issue on the 9th International Charles Parsons Turbine and Generator Conference. All papers have been revised and extended before publication in Materials Science and Technology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

R&D Department, Japan Casting & Forging Corporation, Kitakyushu, Japan

References (12)

Show source-provided references
1. 10.1533/9781845694012.1.1510.1533/9781845694012.1.15 ↗
2. 10.2355/isijinternational.41.61210.2355/isijinternational.41.612 ↗
3. 10.2355/tetsutohagane1955.88.1_3610.2355/tetsutohagane1955.88.1_36 ↗
4. Mikami M. · 2011 · 408
5. Mikami M. · 2014 · 199
6. 10.1007/s11661-002-0375-z10.1007/s11661-002-0375-z ↗
7. 10.1016/j.msea.2011.03.07310.1016/j.msea.2011.03.073 ↗
8. Mikami M. ‘Creep deformation behaviours and microstructural evolution during creep in 10%Cr steel large forging for high temperature steam turbines’, Proc. 1st Int. Conf. on ‘Advanced high-temperature materials technology for sustainable and reliable power engineering (123HiMAT-2015)’, Sapporo, Japan, June 2015, 123rd Committee on Heat Resisting Materials and Alloys, Japan Society for the Promotion of Science, 102–105.
9. 10.2355/isijinternational.40.115610.2355/isijinternational.40.1156 ↗
10. 10.1179/mst.1997.13.3.23310.1179/mst.1997.13.3.233 ↗
11. 10.1007/s12666-015-0759-610.1007/s12666-015-0759-6 ↗
12. Cipolla L., Danielsen H. K., Hald J., Venditti C., Di Gianfrancesco A., and Tiberi Vipraio S. ‘Formation Z-phase in a 12%CrVNbN model steel’, Proc. of ECCC creep Conf., Zürich, Switzerland, April 2009, European Technology Development, 863–876.