article·2014-01-01

Influence of mandrel on cross section deformation of double-ridge rectangular tube in rotary-draw bending process

LI Hai-pin

Abstract

Mandrel can reduce the cross-section distortion in rotary draw bending process and improve the forming accuracy of double-ridge rectangular tube. A reliable three-dimensional FE model of double-ridge rectangular tube in rotary-draw bending is established under the ABAQUS /Explicit environment,and the effects of mandrel on cross-section deformation are obtained. The results show that the maximum deformation of width,height,outer ridge width and double-ridge height along the section is located on the edge of tube. And the maximum deformation of width,height and double-ridge height appears near the 60° bending section,while the maximum deformation of outer-ridge width appears near the 20° bending section along the bending direction. With the increase in number of cores and the decrease of the clearance and friction coefficient between mandrel and tube,the maximum deformation of width,height and double-ridge height decreases,while the maximum deformation of outer-ridge width slightly increases or has almost unchanged.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.