article·2014-01-01

Analysis for microstructure and precipitation phase evolution of friction stir welding 2060 butt joint

Yang Mocon, Fsw Cente

Abstract

In this paper,the microstructure and precipitation phase evolution of friction stir welding butt joint were investigated,for the Al- Li- Cu- Mg- based aluminum-lithium alloy 2060. The cross section of Friction stir welding butt joint could be divided into four distinctive regions: base metal zone,heat-affected zone,thermal mechanically affected zone and weld nugget zone. The microstructure of the base metal consisted of bidirectional slat,large numbers of triangular AlCu2Mn compound precipitated from α lath,which would disappear when subjected to heat action in other zones. The heat-affected zone showed coarse crystal particles,and grain morphology was changed under the action of mechanical force in the thermal mechanically affected zone,stretched at the advancing side and compressed at the retreating side. The weld nugget zone was equiaxed grain structure,the high temperature precipitated phase AlxCuxMn distributed throughout the joint region uniformly. The highest microhardness existed in the base metal zone,and the lowest value was located in the heat-affected zone,with the weld nugget zone steadying at 115 HV,a little lower than the base metal.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.