Effect of temper method on the microstructure and mechanical properties of quenched-tempered high strength steel
Source abstract
Abstract
To improve the plasticity and toughness,two kinds of quenching and tempering process(slow heating rate tempering and induction heating tempering) were used for a high strength low alloy steel.The effect of process on the microstructure and properties of the steel was studied.Microstructure and precipitates were investigated by SEM and TEM,and the retained austenite volume fraction was measured by X ray diffractometer.The results show that the microstructure was martensite with the lath width about 300~500 nm.The lath was clear and the precipitates were about 20 nm,finer than those by conventional process after treated by induction heating tempering process.The yield strength was improved by both processes.However,the total elongation is above 16% and-40 ℃ toughness was above 32 J for the steel treated by induction heating tempering at 500 ℃.The mechanical properties of steel is superior to that by traditional quenched and tempered process.Much more small size precipitates and retained austenite improved the plasticity and toughness of the steel,which were obtained by induction heating tempering.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Laser and Thermal Forming Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.