High temperature deformation of aluminium bronze
Source abstract
Abstract
Hot compression tests were carried out on commercial Cu–8 wt-%Al alloy to test the effect of the deformation conditions on high temperature deformation characteristics and the final structure of the hot deformed material. Dynamic recrystallisation of the material was found to operate at deformation temperatures above ∼900 K. Nucleation and growth of recrystallised grains were observed for specimens deformed at temperatures below ∼1000 K. However, the flow stress peaks that usually mark the onset of dynamic recrystallisation were hardly seen on the stress–strain curves. During hot deformation of Cu–8 wt-%Al alloy above ∼1000 K the interaction of →β phase transformation and deformation processes affected both the flow stress value and the structure of the material. In particular, post-deformation water quenching of the specimens resulted in martensitic transformation within pre-existing β grains. Moreover, local coherent iron particles were detected within β and neighbouring grains.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. 10.1007/BF0265830110.1007/BF02658301 ↗
2. 10.1016/0001-6160(83)90076-710.1016/0001-6160(83)90076-7 ↗
3. 10.1007/BF0264797110.1007/BF02647971 ↗
4. E. G. WEST: ‘Copper and its alloys’, 1982, Chichester, UK, Ellis Horwood.
5. 10.1179/mtlr.1969.14.1.110.1179/mtlr.1969.14.1.1 ↗
6. BLAZ L. · Arch. Metall · 1989 · 34 · 163
7. 10.1016/0001-6160(73)90095-310.1016/0001-6160(73)90095-3 ↗