journal article·2014-07Open access

Architectured microstructures in steel

G. Anand, P. Dey, P. J. J. Kok, D. Chakraborty, P. P. Chattopadhyay

Materials Science and Technology· Volume 30· Issue 9

Abstract

In the traditional physical metallurgy approach, the microstructure evolves as the product of the interactions between composition and process parameters, controlled by thermodynamic and kinetic conditions. Thus, the approach is more evolutionary than constructive. An architecturally designed microstructure implies planning, design and construction of microstructure considering nature, size, morphology and distribution of the constituent phases on a suitably conceived topological framework. This investigation puts emphasis on performance driven construction of the microstructure with precise calculation of response of microstructural constituents under the given loading conditions. With the aforesaid motivation, the present study elucidates the principle involving microstructural generation by Voronoi tessellation and subsequent elastoplastic finite element simulation. In addition, the present study also explores the correlation between architecturing and initiation of instability in the microstructure through genetic programming.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, Howrah, India

School of Materials Science and Engineering, Bengal Engineering and Science University, Shibpur, Howrah, India

Tata Steel, Research and Development, Ijmuiden, Netherlands

Indian Institute of Technology, Kharagpur, India

References (23)

Show source-provided references
1. 10.1016/j.scriptamat.2012.07.03810.1016/j.scriptamat.2012.07.038 ↗
2. Kromm FX · 2002 · 4 · 371
3. 10.1016/j.scriptamat.2012.05.04010.1016/j.scriptamat.2012.05.040 ↗
4. 10.1016/j.scriptamat.2012.08.00410.1016/j.scriptamat.2012.08.004 ↗
5. 10.1016/j.scriptamat.2012.05.04110.1016/j.scriptamat.2012.05.041 ↗
6. 10.1016/j.scriptamat.2012.08.00810.1016/j.scriptamat.2012.08.008 ↗
7. 10.1038/srep0344810.1038/srep03448 ↗
8. 10.1002/adem.20090018010.1002/adem.200900180 ↗
9. Speich GR: in ‘Fundamentals of dual phase steels’, (ed. Kot R A and Bramfitt B L), 1; 1981, New York, AIME.
10. 10.1007/BF0059575010.1007/BF00595750 ↗
11. 10.1007/s11661-999-0269-410.1007/s11661-999-0269-4 ↗
12. 10.1007/BF0058014810.1007/BF00580148 ↗
13. 10.1007/BF0035469510.1007/BF00354695 ↗
14. 10.1007/s10853-009-3392-010.1007/s10853-009-3392-0 ↗
15. Bohm HJ · Trans. AIME · 1994 · 116 · 268
16. Gurland J · Trans. AIME · 1958 · 212 · 452
17. 10.1002/978047031701310.1002/9780470317013 ↗
18. S. Yadegari, S. Turteltaub, A. S. J. Suiker, P. J. J. Kok: ‘Analysis of banded microstructures in multiphase steels assisted by transformation-induced plasticity’, Comp. Mater. Sci., 2014, 84, 339–349.10.1016/j.commatsci.2013.12.002 ↗
19. 10.1007/978-3-540-77974-210.1007/978-3-540-77974-2 ↗
20. 10.1016/j.commatsci.2007.07.03510.1016/j.commatsci.2007.07.035 ↗
21. 10.1016/j.ijplas.2008.12.01210.1016/j.ijplas.2008.12.012 ↗
22. KozaJR: ‘Genetic programming: on the programming of computers by means of natural selection’; 1992, Cambridge, MA, MIT Press.
23. 10.1016/j.jmatprotec.2004.09.00410.1016/j.jmatprotec.2004.09.004 ↗