First order reaction kinetics for transient creep in NiAl hardened austenitic steel
Source abstract
Abstract
Transient creep of an NiAl hardened austenitic steel was analysed in the temperature range of 823 to 923 K at stresses ranging from 150 to 450 MPa in the frame work of first order reaction kinetics. The present analysis is aimed: to correlate various transient creep parameters with steady state creep rate following first order reaction rate theory to obtain correlation constants; and to arrive at a unified equation to describe primary and steady state regimes of the creep curves in terms of correlation coefficients thus derived. Good correlation of transient creep parameters with steady state creep rate has been obtained over the test conditions studied indicating that the basic mechanism of deformation is the same for all the three stages of creep. Unified equation that fits the experimental creep strain time data for different test conditions over transient and steady state regimes has been obtained in terms of correlation coefficients.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Defence Metallurgical Research LaboratoryKanchanbagh, Hyderabad 500058, India;, Email: dvvsn@rediffmail.com
Defence Metallurgical Research LaboratoryKanchanbagh, Hyderabad 500058, India
Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India
Formerly ProfessorDepartment of Metallurgical Engineering, Banaras Hindu University, Varanasi 221005, India
References (24)
Show source-provided references
1. 10.1179/msc.1969.3.1.22110.1179/msc.1969.3.1.221 ↗
2. 10.1016/0036-9748(69)90074-X10.1016/0036-9748(69)90074-X ↗
3. Mc Vetty P. G. · Mech. Eng · 1934 · 56 · 149
4. Garofalo F. ‘Fundamentals of creep and creep rupture in metals’; 1965, New York, Macmillan.
5. Conway J. B. ‘Numerical methods for creep and rupture analysis’; 1968, New York, Gordon & Breach.
6. Conway J. B. · Trans. Met. Soc. AIME · 1966 · 242 · 1496
7. Evans W. J. · Trans. Met. Soc. AIME · 1968 · 242 · 2514
8. 10.1016/0022-5096(70)90018-910.1016/0022-5096(70)90018-9 ↗
9. 10.1016/0025-5416(75)90205-010.1016/0025-5416(75)90205-0 ↗
10. Evans R. W., Parker J. D., and Wilshire B. ‘Recent advances in creep and fracture of engineering materials and structures’, (ed. B. Wilshire and D. R. J. Owen), 135; 1982, Swansea, Pineridge Press.
11. 10.1007/BF0264342610.1007/BF02643426 ↗
12. 10.1016/0956-7151(91)90253-W10.1016/0956-7151(91)90253-W ↗
13. Threadgill P. L., and Wilshire B. ‘Creep strength in steel and high temperature alloys’, 8; 1972, London, The Metal Society.
14. Choudhary B. K., Phaniraj C., Bhanusankara Rao K., and Mannan S. L.: Proc. 8th Int. Conf. on ‘Creep and fracture of engineering materials and srtuctures’, (ed.Sakuma T., and Yagi K.), Vol. 171-174, 437; 2000, Sukuba.10.4028/www.scientific.net/KEM.171-174.437 ↗
15. 10.1016/S1044-5803(01)00153-X10.1016/S1044-5803(01)00153-X ↗
16. 10.1179/03063458379042759510.1179/030634583790427595 ↗
17. Bhargava R. K.: PhD thesis, University of Cincinnati, 1975.
18. 10.1016/0036-9748(77)90313-110.1016/0036-9748(77)90313-1 ↗
19. 10.1080/0141861790823927610.1080/01418617908239276 ↗
20. 10.1016/S0921-5093(01)01342-910.1016/S0921-5093(01)01342-9 ↗
21. Lewis M. H., and Martin J. W.: Acta Met. 1963, 11, 1207.10.1016/0001-6160(63)90109-3 ↗
22. Mukharjee A. K. · Trans. ASM · 1969 · 62 · 155
23. Monkman F. C. · Proc. ASTM · 1956 · 56 · 593
24. 10.1080/03063453.1976.1168356010.1080/03063453.1976.11683560 ↗