In situ synthesis of titanium diboride composites through volume combustion
Source abstract
Abstract
Hard in situ synthesis of TiB2–Fe2B metal matrix composite (MMC) has been synthesised by volume combustion synthesis (VCS) reactions of Fe–FeTi–FeB system. VCS samples were characterised by SEM, EDX, XRD and DTA. Results show that it is possible to synthesise in situ structured MMC samples (with TiB2 and Fe2B phases) by VCS. Metallographic investigations show that Fe2B and TiB2 are found dispersed throughout the metal matrix, and other borides are present in microlevel patches dispersed in a eutectic matrix. The Fe–TiB2 composites sintered at temperature of 1200°C consist of three different regions, i.e. α-Fe, TiB2 and Fe2B regions. The increase in sintering temperature to 1400°C leads to a hypereutectic microstructure of the Fe–B binary system having TiB2 grains uniformly distributed throughout the matrix. A semiliquid phase sintering occurred by increasing eutectic phase transformation temperatures to 1400°C, which increased the efficiency of VCS. On the other hand, increasing sintering time from 1 to 3 h decreased the volume fraction of α-Fe and increased the volume fraction TiB2 phase.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Material Engineering Science Firat University, 23119 Elazig, Turkey
References (25)
Show source-provided references
1. Fan Z · Key Eng. Mater. · 1997 · 127 · 423
2. 10.1016/S0043-1648(99)00127-110.1016/S0043-1648(99)00127-1 ↗
3. 10.1016/0956-716X(95)90840-G10.1016/0956-716X(95)90840-G ↗
4. 10.1016/S0167-577X(99)00123-810.1016/S0167-577X(99)00123-8 ↗
5. 10.1016/0956-716X(90)90128-410.1016/0956-716X(90)90128-4 ↗
6. 10.1007/s10853-006-1430-810.1007/s10853-006-1430-8 ↗
7. Laird G, Gundlach R, Rohrig K: ‘Abrasion-resistant cast iron handbook’, 72; 2000, Schaumburg, IL, American Foundry Society.
8. 10.1016/j.jallcom.2007.09.06310.1016/j.jallcom.2007.09.063 ↗
9. Wu K H, Liu C T, Baker in: I, Darolia R, Whitten Berger J D, Yoo M H: ‘High temperature ordered intermetallic alloys V’, 841; 1993, Pittsburgh, PA, MRS.
10. Bannyh OA, Dritsa MYe: ‘State diagramms of double and multicomponent systems on the base of ıron’; 1996, Moscow, Metallurgy.
11. Miura S, Mishima Y:in ‘High temperature ordered intermetallic alloys VI. Part I’(, Horton J A, et al.), 561; 1995, Pittsburgh, PA, MRS.
12. 10.1016/0263-4368(93)90018-B10.1016/0263-4368(93)90018-B ↗
13. Burakowski T, Wierzchon T: ‘Surface engineering of metals’; 1999, London, CRC Press.10.1201/9780367802325 ↗
14. 10.1016/1044-5803(91)90018-Y10.1016/1044-5803(91)90018-Y ↗
15. 10.1016/j.triboint.2009.04.04110.1016/j.triboint.2009.04.041 ↗
16. 10.1016/j.jallcom.2005.09.08710.1016/j.jallcom.2005.09.087 ↗
17. Reed-Hill RE: ‘Physical metallurgy principles’, 2nd edn; 1973, Boston, PWS-Kent.
18. 10.1016/0921-5093(90)90232-R10.1016/0921-5093(90)90232-R ↗
19. 10.1016/S0043-1648(99)00127-110.1016/S0043-1648(99)00127-1 ↗
20. 10.1179/02670839910150590510.1179/026708399101505905 ↗
21. 10.1007/BF0115214610.1007/BF01152146 ↗
22. 10.1007/s11661-999-0213-710.1007/s11661-999-0213-7 ↗
23. 10.1016/S0266-3538(99)00056-110.1016/S0266-3538(99)00056-1 ↗
24. 10.1016/0956-716X(94)90267-410.1016/0956-716X(94)90267-4 ↗
25. 10.1016/S0921-5093(00)00797-810.1016/S0921-5093(00)00797-8 ↗