journal article·1986-02

Corrosion of two similar austenitic stainless steels when welded

R. Fenn, C.J. Newton

Publisher page

Abstract

Two similar grades of austenitic stainless steel (317 L and 317 LM) were welded and their corrosion behaviour noted potentiostatically. It was found that, because of its higher Mo content, 317LM exhibited less active current densities and passive ranges than 317L when the heat affected zone (HAZ) microstructures were examined. This finding held good for a range of δ–ferrite contents representing the whole width of the HAZ. In the weld bead, however, the behaviour of both materials was essentially similar. Electron optical studies were performed on polarized samples and it was found that in both HAZ and weld bead regions there was a distinct Mo denudation zone at the δ/γ boundary. It was found that in HAZ material the reduction of Mo was associated with the production of very small particles on the δ/γ grain boundary, believed to be metallic (mainly Mo) carbides. From these findings it was concluded that it is unwise to discuss the corrosion resistance of welded austenitic stainless steels without detailing the method of formation of the δ-phase. To aid this, solid–phase transformation δ is termed δ s and liquid–phase formed δ,δ L . MST/115
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. ARCHER R. S. BRIGGS J. Z. and LOEB C. M.: ‘Molybdenum steels irons and alloys’; 1970 New York Climax Molybdenum.
2. 10.1179/imr.1982.27.1.32110.1179/imr.1982.27.1.321 ↗
3. Stainless Steels BSC Division; Data Sheet on 317LM, 1983.
4. KING K. J.: personal communication to one author (CJN), 1983.
5. HOLT R. M., and NICHOLSON O. P.: J. Iron Steel Inst., 1962, 200, 715–722.
6. NEwTox C. J.: BSc project, Dept of Metallurgy, Brunel University, 1983.
7. CASTRO R. J., and de CADNET J. J.: ‘Welding metallurgy of stainless and heat resisting steels’;. 1975, Cambridge University Press.
8. LANCASTER J. F.: ‘Metallurgy of welding’ 3 edn; 1980 London Allen and Unwin.10.1007/978-94-010-9506-8 ↗
9. COLOMBIER L. and HOCHMAN J.: ‘Stainless and heat resisting steels’; 1967 London Edward Arnold.
10. BARNES N. R., and FENN R.: Power Ind. Res., 1981, 1, (1), 65–73.
11. WOOLLEY R. G.: 4th year project, Dept of Metallurgy, Brunel University, 1981.
12. AVNER S. H.: ‘Introduction to physical metallurgy’; 1974 New York McGraw-Hill.
13. MONEYPENNY J.: ‘Stainless iron and steel’ Vol. 1; 1951 London Chapman and Hall.
14. PICKERING F. B.: Int. Metall. Rev., 1976, 21, (6), 227–268.
15. YOUNGER R. N., and BAKER R. G.: J. Iron Steel Inst., 1960, 196, 188–194.
16. PECKNER D. and BERNSTEIN J. M.: ‘Handbook of stainless steels’; 1977 London McGraw-Hill.
17. SHRIER L. L. (ed.): ‘Corrosion’ Vol. 1; 1965 London Newnes.
18. LANCASTER J. F.: Int. Metall. Rev., 1978, 23, (3), 101–147.
19. VISWANATHAN R., , GANGADHARAN R., , and ODUTOLA J. A.: Weld. J., 1979, 58, (4), 118s–126s.
20. GNANAMOORTHY J. B., , DAYAL R. K., , GILL T. P. S., , and KHATAK H. S.: Weld. J., 1979, 58, (5), 375s–378s.
21. TAMA I.: Weld. Res. Abs., 1975, 4, 11.
22. 10.1179/03063457679043238010.1179/030634576790432380 ↗
23. GOOCH T. G. and WILLINGHAM D. C.: ‘Weld decay in austenitic stainless steels’; 1976 Abington The Welding Institute.
24. BROWN R.: 4th year project, Dept of Metallurgy, Brunel University, 1979.
25. DAVID s. A.: Weld. J., 1981, 60, (4), 69s–70s.
26. HILLARD J. E., and CAHN J. W.: Trans. AIME, 1961, 221, 344–348.
27. 10.1179/03071698280328593610.1179/030716982803285936 ↗
28. FENN R.: PhD thesis University of Aston in Birmingham 1977.
29. FENN R. and JORDAN M. F.: Met Technol. 1982 9 327–337.10.1179/030716982803285701 ↗
30. 10.1080/03063453.1974.1191076610.1080/03063453.1974.11910766 ↗
31. HONEYCOMBE R. W. K.: Metall. Trans., 1976, 7A, (7), 916–936.
32. DAVENPORT A. T., and HONEYCOMBE R. W. K.: Proc. R. Soc., 1971, 322, 191–205.
33. HONEYCOMBE R. W. K.: ‘Steels microstructure and properties’; 1981 London Edward Arnold.
34. MARZEE-ASHFORD R. and TALBOT D. E. J.: in ‘Corrosion ‘82’ 1982 Houston Tex. National Association of Corrosion Engineers Session 7 Paper 9.
35. SCULLY J. C.: ‘The fundamentals of corrosion’ 2 edn; 1981 London Pergamon.
36. EVANS U. R.: ‘The corrosion and oxidation of metals — scientific principles and practical applications’; 1960 London Edward Arnold.