journal article·1987-06

Simple phenomenological expression for plastic deformation of pure metals and single-phase alloys to high strains

J. Nutting, G. Pollard

Publisher page

Abstract

Recent studies on the deformation of metals indicate that at relatively high strains the flow stress does not increase with further strain. The mathematical expressions usually used to derive the relationship between stress and strain (generally the Ludwik or Hollomon equations) do not predict such a plateau. A new expression (σ = K1mn(tanh ε/m)n is proposed, where K and n have the same values as the original Hollomon equation and m is an additional disposable parameter. The new expression reduces to the Hollomon equation at low strains but, by adjusting the value of m, can be made to correspond to the high-strain behaviour. For copper and silver, using values of n = 0·5 and m = 2, the ratio of the flow stresses at unit strain to the saturation flow stresses corresponds to those observed experimentally.MST/455
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. P. LUDWIK: ‘Elemente der technologischen Mechanik’, 32; 1909, Berlin, J. Springer.10.1007/978-3-662-40293-1 ↗
2. HOLLOMON J. H. · Trans AIME · 1945 · 162 · 268
3. VOCE E. · J. Inst. Met., · 1948 · 74 · 537
4. HARTLEY C. S. · Trans. ASME · 1983 · 105 · 162
5. V. M. SAMPLE and L. A. LALLI: in ‘Aluminium technology '86’, 175; 1986, London, The Institute of Metals.
6. CONSIDERE A. · Ann. Fonts Chaussées · 1885 · 9 · 574
7. 10.1179/msc.1978.12.9.43010.1179/msc.1978.12.9.430 ↗
8. 10.1179/03063458479041962910.1179/030634584790419629 ↗
9. J. NUTTING: ‘Electron microscopy’, Vol. 1, 580-581; 1974, Canberra, Australian Academy of Science.
10. PRAGER W. · Reported in W. Johnson and P. B. Mellor: ‘Plasticity for mechanical engineers’, 15; 1962, London, Van Nostrand