journal article·2011-01

Effect of austenitising temperature on microstructure and mechanical properties of 30Si2CrNi4MoNb ultrahigh strength steel

Z. X. Xia, C. Zhang, Z. Y. Yang

Materials Science and Technology· Volume 27· Issue 1
Publisher page

Abstract

The microstructure and mechanical properties of 30Si2CrNi4MoNb ultrahigh strength steel were investigated after austenitising over a range of temperature between 1133 and 1483 K. The experimental results show that the isotropy of impact toughness and mechanical properties were greatly improved due to the disappearance of undissolved aligned second phase when the austenitising temperature was over 1233 K. When the austenitising temperature was over 1383 K, martensite lath and packet abnormally grew up due to dissolution of spheroidal Nb rich carbonitrides; both the platelet size and morphology of martensite were changed, which has an effect on the mechanical properties of the samples. It was noticed that the finer self-tempered carbides, which strengthened martensitic matrix, appeared after austenitising temperature over 1283 K. The strength profiles show a marked plateau for the samples austenitised from 1283 to 1433 K; however, the strength was deteriorated due to coarsening of these self-tempered carbides at 1483 K. It was confirmed that calcium treatment can help improve the isotropy of mechanical properties by modifying sulphide inclusion morphology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering Tsinghua University, Beijing 100084, China

Institute of Structure Materials, Central Iron and Steel Research Institute, Beijing 100081, China

References (21)

Show source-provided references
1. 10.1007/BF0281198310.1007/BF02811983 ↗
2. 10.1002/srin.19940120010.1002/srin.199401200 ↗
3. 10.1007/BF0264666110.1007/BF02646661 ↗
4. 10.2355/isijinternational.30.52010.2355/isijinternational.30.520 ↗
5. 10.1016/S1359-6462(00)00617-510.1016/S1359-6462(00)00617-5 ↗
6. 10.2355/isijinternational.34.19810.2355/isijinternational.34.198 ↗
7. 10.2355/isijinternational.42.139110.2355/isijinternational.42.1391 ↗
8. 10.1007/s11661-003-0303-x10.1007/s11661-003-0303-x ↗
9. Speich G. R. · Trans. Metall. Soc. AIME · 1969 · 245 · 2553
10. 10.1016/j.msea.2006.01.02710.1016/j.msea.2006.01.027 ↗
11. Dong T., Meng F. M., and Wang Z. B. ‘The application of Nb in steel’, 360–370; 1999, Beijing, Metallurgy Industry Press.
12. Wang C. F. · J. Mater. Sci. Technol. · 2007 · 23 · 659
13. Xia Z. X. · Special Steel · 2008 · 29 · 60
14. Xia Z. X. · Iron Steel · 2008 · 43 · 41
15. Xia Z. X. · J. Aeronaut. Mater. · 2008 · 28 · 17
16. 10.1046/j.1365-2818.1997.1420703.x10.1046/j.1365-2818.1997.1420703.x ↗
17. 10.1007/BF0246579710.1007/BF02465797 ↗
18. Yong Q. L. ‘The second phase in steel material’, 15–20; 2006, Beijing, Metallurgy Industry Press.
19. 10.1016/j.actamat.2004.09.04110.1016/j.actamat.2004.09.041 ↗
20. Leslie W. C.: in ‘Mechanical working and steel processing XX’; 3–50; 1983, Warrendale, PA, ISS-AIME.
21. 10.1007/BF0264500610.1007/BF02645006 ↗