journal article·2001-11

Exceeding average rule of mixtures stiffness in composite materials with interconnected fibres as reinforcement

V.V. Ganesh, M. Gupta

Materials Science and Technology· Volume 17· Issue 11
Publisher page

Abstract

In the present study, a galvanised iron wire mesh structure of two different types was used to reinforce aluminium alloy 1050. The composite was synthesised using conventional casting followed by hot extrusion. Microstructural characterisation of the composite specimens showed good interfacial integrity between the matrix and the reinforcement wire. Thermomechanical analysis demonstrated that the average coefficient of thermal expansion of the composites was decreased below the values predicted by theoretical models. Tensile tests conducted on the composite specimens revealed that the average elastic modulus of the composites exceeded the rule of mixtures predictions. The average values of 0.2 yield strength and ultimate tensile strength of the composites were found to be higher than those of the monolithic aluminium alloy irrespective of a low volume fraction 0.049 of reinforcement. This unusual variation in the properties clearly reflects the uniqueness of using interconnected wires as reinforcement in the metallic matrix. An attempt is made in the present study to rationalise particularly the tensile behaviour, especially the stiffness of the composite material, according to the type of reinforcement preform in the aluminium alloy matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
2. S. SURESH, A. MORTENSEN, and A. NEEDLEMAN: 'Fundamentals of metal matrix composites', 3–23; 1993, Boston, MA, Butterworth-Heinemann.
3. M. TAYA and R. J. ARSENAULT: 'Metal matrix composites; thermomechanical behaviour', 1–8, 1989, New York, Pergamon Press.10.1016/B978-0-08-036984-6.50006-5 ↗
4. R. K. EVERETT and R. J. ARSENAULT: 'Metal matrix composites: processing and interface', 64–67; 1991, New York, Academic Press.10.1016/B978-0-12-341832-6.50005-0 ↗
5. SESHAN S. · Indian Inst. Sct · 1996 · 76 · 1
6. 10.1016/S0924-0136(96)02645-310.1016/S0924-0136(96)02645-3 ↗
7. 10.1016/S0921-5093(98)01161-710.1016/S0921-5093(98)01161-7 ↗
8. PAN J. · Key Eng. Mater · 1995 · 104
9. T. MOROOKA, E. YUASA, and T. SHU: Proc. Thirtieth Japan Cong. on 'Materials research', (ed. K. Komai et al), 139–145; 1987, Kyoto, Society of Materials Science, Japan.
10. ASTHANA R. · J. Mater. Synth. Process · 1997 · 5 · 251
11. J. R. DAVIS et al. `ASM Specialty handbook, aluminium and aluminium alloys', 645; 1993, Materials Park, OH, ASM International.
12. T. W. CLYNE and P. J. WITHERS: 'An introduction to metal matrix composites', 122; 1993, Cambridge, Cambridge University Press.10.1017/CBO9780511623080 ↗
13. 10.1016/0266-3538(94)90122-810.1016/0266-3538(94)90122-8 ↗
14. 10.1023/A:100863453198010.1023/A:1008634531980 ↗
15. C. J. SMITHELLS: 'Metals reference book', 5th edn; 1976, London, Butterworths.
16. M. BAUCCIO: 'Metals reference book', 3rd edn, 311; 1993, Materials Park, OH, ASM International.
17. R. B. ROSS: 'Metallic materials specification handbook', 701; 1972, London, E. & F. N. Spon.
18. BOCCHINI G. F. · Int. J. Powder Metall · 1986 · 22 · 185
19. 10.1016/0956-716X(93)90380-B10.1016/0956-716X(93)90380-B ↗
20. 10.1016/S0025-5408(98)00205-010.1016/S0025-5408(98)00205-0 ↗
21. 10.1016/S1359-6454(98)00320-610.1016/S1359-6454(98)00320-6 ↗