journal article·2009-06

Cyclic stress–strain characteristics of two microalloyed steels

C. Gupta, J. Nagchaudhury, J. K. Chakravartty, R. C. Prasad

Materials Science and Technology· Volume 25· Issue 6
Publisher page

Abstract

The cyclic stress–strain behaviour of two microalloyed steels with different microstructures has been characterised at room temperature under strain controlled low cycle fatigue. The cyclic stress–strain curve in the double logarithmic plot shows a linear relation for both steels. A transition of the cyclic stress–strain curve from softening to hardening with increasing strain amplitude has been observed with respect to the corresponding tensile curve. The strain amplitude for the onset of cyclic softening to hardening transition has been found to be dependent on grain size. The strain lifetime behaviour, estimated from modified universal slopes equation, shows similar trends as Nb or V bearing microalloyed steels. The cyclic characteristics of the two microalloyed steels have been compared with corresponding predeformed state carried out under stress controlled conditions. While, cyclic saturation was observed in case where the extent of predeformation was within the Lüders strain, cyclic softening occurred when it exceeded the Lüders strain. It has been attempted to provide a mechanistic understanding of the differences in the cyclic behaviour of the two steels owing to the microstructure and predeformation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Metallurgy SectionMaterials Group, Bhabha Atomic Research Centre, Mumbai-85, India;, Email: joy_gupta71@yahoo.co.in

Department of Materials and Metallurgical EngineeringIndian Institute of Technology, Mumbai-76, India

Mechanical Metallurgy SectionMaterials Group, Bhabha Atomic Research Centre, Mumbai-85, India

References (49)

Show source-provided references
1. Hudok D., Mahaney J. K.Jr, Cantwell A. P., and van Meter E.: in ‘Metals handbook’, 10th edn, Vol. 1, 204; 1990, Material Park, OH, ASM International.
2. Estrin Y., and Kubin L. P. ‘Continuum models for materials with msicrostructure’, (ed.Muhlhaus H. B.), 395440; 1995, Chichester,John Wiley & Sons Ltd.
3. Dieter G. E. ‘Mechanical metallurgy’, SI edn; 1988, New York, McGraw Hill.
4. Klesnil M. · J. Iron Steel Inst · 1967 · 205 · 746
5. 10.2355/isijinternational.37.115410.2355/isijinternational.37.1154 ↗
6. Klesnil M. · J. Iron Steel Inst · 1965 · 203 · 47
7. Radhakrishnan V. M., and Mutho Y.: in ‘The behaviour of short cracks’, (ed. Miller K. J., and delosRios E. R.), 87; 1986, London Mechanical Engineering Publications.
8. Abel A., and Muir H.: Acta Metall. 1973, 21, 93–98.10.1016/0001-6160(73)90051-5 ↗
9. Abel A., and Muir H.: Acta Metall. 1973, 21, 99–104.10.1016/0001-6160(73)90052-7 ↗
10. 10.1016/j.ijpvp.2005.01.00510.1016/j.ijpvp.2005.01.005 ↗
11. Bastien P. G. · J. Iron Steel Inst · 1957 · 187 · 281
12. 10.1179/cmq.1962.1.1.5910.1179/cmq.1962.1.1.59 ↗
13. Grossterlinden R., Kawalla R., Lotter U., and Pircher H.: Steel Res. 1992, 63, 331–336.10.1002/srin.199200529 ↗
14. 10.1179/mst.1992.8.9.77710.1179/mst.1992.8.9.777 ↗
15. 10.1179/02670830122500075210.1179/026708301225000752 ↗
16. Jatczak C. F. · Trans. ASM · 1956 · 48 · 279
17. Petch N. J.: Acta Metall. 1964, 12, 59–65.10.1016/0001-6160(64)90054-9 ↗
18. Morrow J. D. · ASTM STP · 1965 · 378 · 45
19. 10.1016/S0142-1123(96)00059-X10.1016/S0142-1123(96)00059-X ↗
20. 10.1016/j.ijpvp.2005.01.00510.1016/j.ijpvp.2005.01.005 ↗
21. 10.1007/BF0266135710.1007/BF02661357 ↗
22. 10.1007/BF0264594910.1007/BF02645949 ↗
23. 10.1520/JTE10898J10.1520/JTE10898J ↗
24. 10.1007/BF0265833410.1007/BF02658334 ↗
25. 10.1016/0921-5093(93)90599-A10.1016/0921-5093(93)90599-A ↗
26. Li J. C. M. · Trans. Metall Soc. AIME · 1963 · 227 · 239
27. 10.1080/1478643700823842610.1080/14786437008238426 ↗
28. Thomson A. W. · Metall · 1973 · 5
29. 10.1080/0141861820823692810.1080/01418618208236928 ↗
30. 10.1016/0025-5416(77)90133-110.1016/0025-5416(77)90133-1 ↗
31. 10.1016/S0142-1123(96)00060-610.1016/S0142-1123(96)00060-6 ↗
32. Chung Y. W., and Lee W. J.: Mater. Sci. Eng. A, 1994, A186,121–128.
33. 10.1016/0036-9748(79)90073-510.1016/0036-9748(79)90073-5 ↗
34. 10.1016/0036-9748(78)90308-310.1016/0036-9748(78)90308-3 ↗
35. 10.1080/1478643560823808610.1080/14786435608238086 ↗
36. 10.1016/0001-6160(81)90117-610.1016/0001-6160(81)90117-6 ↗
37. 10.1016/0036-9748(80)90249-510.1016/0036-9748(80)90249-5 ↗
38. 10.1007/BF0281482610.1007/BF02814826 ↗
39. 10.1007/BF0265456010.1007/BF02654560 ↗
40. Laird C. · ASTM STP · 1967 · 415 · 131
41. 10.1007/BF0265349910.1007/BF02653499 ↗
42. 10.1115/1.322601010.1115/1.3226010 ↗
43. 10.1016/0142-1123(95)99737-U10.1016/0142-1123(95)99737-U ↗
44. Lowe T. C., and Valiev R. Z. (eds.): ‘Investigations and applications of severe plastic deformation’; 2000, Dodrecht, Kluwer Academic Publishers.10.1007/978-94-011-4062-1 ↗
45. 10.3139/146.03107910.3139/146.031079 ↗
46. 10.3139/146.02064110.3139/146.020641 ↗
47. 10.1016/0142-1123(90)90092-S10.1016/0142-1123(90)90092-S ↗
48. Gupta C. · 2007
49. 10.1016/0025-5416(87)90421-610.1016/0025-5416(87)90421-6 ↗