journal article·2008-01

Mechanical and hardness evaluations of Fe–18Cr–18Mn alloys

J. Rawers, N. Duttlinger

Materials Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

A series of Fe–18Cr–18Mn–N–C alloys was produced and evaluated to determine their mechanical and hardness properties. In one group, different levels of nitrogen and carbon were added to a base composition of Fe–18Cr–18Mn. The base Fe–18Cr–18Mn alloy had a fcc–bcc duplex microstructure. The addition of nitrogen and carbon stabilised the fcc phase. These alloys had increasing room temperature hardness, strength, and failure energy with increasing interstitial concentrations. At cryogenic and elevated temperatures, these alloys had increasing hardness (and by implication, increased strength) with increasing interstitial concentrations. In a second group, different levels of nitrogen and carbon were added to the base Fe–18Cr–18Mn composition to which minor solid solution additions of silicon, molybdenum, and nickel had been added. Minor alloy additions made only nominal improvement to mechanical and hardness properties. Nitrogen remained interstitial. However, these minor solid solution additions reduced carbon solubility resulting in the formation of M 23 C 6 precipitates that, while increasing alloy hardness and strength, greatly reduced fracture toughness. The present study suggests that replacing nickel with manganese in stainless steels results not only in more economical alloys but also in alloys with higher strength and hardness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Boyer H. and Timothy G. (eds.): ‘Metals handbook desk edition 1985’ Chap. 15 ‘Corrosion resistant materials’ J. Redmond (ed.) p. 15.2 Table 3; 1985 Metals Park OH American Society for Metals.
2. Boyer H. and Timothy G. (eds.): ibid. Chap. 15 p. 15.6 Table 9.
3. Boyer H. and Timothy G. (eds.): ibid. Chap. 15 p. 15.4 Table 6.
4. Boyer H. and Timothy G. (eds.): ibid. Chap. 1 pp. 1.60-1.62.
5. Gavriljuk V. and Berns H.: ‘High nitrogen steels: structures properties manufacture applications’ 136; 1999 Berlin Springer.10.1007/978-3-662-03760-7 ↗
6. Foct J. and Hendry A.: ‘High nitrogen steels’ 10; 1988 Lille The Institute of Metals.
7. Rawers J.: Proc. Conf. HNS2003 Schaffhausen Switzerland March 2003 (ed.Speidel M. et al.) ‘Preliminary study into stability of interstitial nitrogen and carbon in steels’.
8. 10.4028/www.scientific.net/MSF.426-432.94310.4028/www.scientific.net/MSF.426-432.943 ↗
9. Shanina B. and Gavriljuk V.: Proc. Conf. HNS2004 Ostend Belgium (ed.Akdut N. .) ‘Effects of carbon and nitrogen on the electronic structure of steels’.
10. Rawers J.: Proc. Inst. Mech. Eng. 2004 218 (L) 239.10.1243/1464420041579526 ↗
11. Gavriljuk V. and Berns H.: ‘High nitrogen steels: structures properties manufacture applications’ 236; 1999 Berlin Springer.10.1007/978-3-662-03760-7 ↗
12. Gavriljuk V. and Berns H.: ‘High nitrogen steels: structures properties manufacture applications’ 126; 1999 Berlin Springer.10.1007/978-3-662-03760-7 ↗
13. Degallaix S. Seddouli A. Nilsson J. and Polak J.: Proc. Conf. HN593 Kiev Ukraine March 1993 420.
14. Peckner D. and Bernstein I.: ‘Handbook of stainless steel’ 12-20 38; 1977 New York McGraw-Hill.
15. Ashland D. R.: ‘The science and engineering of materials’ p. 209 Table 9-1; 1996 New York Chapman and Hall.
16. Hertzberg R.: Deformation and fracture mechanics of engineering materials’ p. 19 Table 1.5; 1976 New York Wiley.
17. 10.1063/1.172144810.1063/1.1721448 ↗
18. ‘Stainless steel world news’ June 21 2007.