journal article·2003-04

Hot deformation behaviour of Cu-1.5Ti (wt-%) alloy

S. Nagarjuna, A. Dutta

Materials Science and Technology· Volume 19· Issue 4
Publisher page

Abstract

A Cu-1.5Ti (wt-%) alloy was subjected to hot compression tests at temperatures ranging from 750 to 900°C and strain rates from 100 s-1 to 10-3 s-1. Flow softening was found to occur at all temperatures and strain rates studied. Deformation at 750°C and a relatively high strain rate (100 s-1) resulted in grain refinement of the alloy with a grain size of ~25 μm. Room temperature hardness decreased with increasing deformation temperature, i.e. 145 HV10 after deforming at 750°C and 90 HV10 at 900°C. The higher values of hardness observed after deformation at 750°C are attributed to the fine grain size. A maximum value of 0.21 obtained for the strain rate sensitivity index m is not indicative of superplasticity in this alloy. Activation energy Q for the hot deformation process at 1173 K and strain rate 10-3 s-1 was determined to be 76 kJ mol-1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. SAARIVIRTA M. J. · Met. Frog., · 1959 · 76 · 81
2. 10.1016/0001-6160(75)90125-X10.1016/0001-6160(75)90125-X ↗
3. 10.1016/0001-6160(76)90129-210.1016/0001-6160(76)90129-2 ↗
4. 10.2320/matertrans1989.36.105810.2320/matertrans1989.36.1058 ↗
5. 10.1023/A:101860843044310.1023/A:1018608430443 ↗
6. 10.1023/A:100460390635910.1023/A:1004603906359 ↗
7. 10.1179/02670830177300247310.1179/026708301773002473 ↗
8. 10.1016/0956-716X(94)90314-X10.1016/0956-716X(94)90314-X ↗
9. 10.1016/1359-6454(95)00358-410.1016/1359-6454(95)00358-4 ↗
10. BLAZ L. · Metall Mater. Trans. A · 1991 · 25 · 25710.1007/BF02647971 ↗