journal article·2005-02

Effect of Ti/C ratio on temperature dependence of low cycle fatigue behaviour of15Cr–15Ni titanium modified austenitic stainless steel

R. Sandhya, K. Bhanu Sankara Rao, S. L. Mannan

Materials Science and Technology· Volume 21· Issue 2
Publisher page

Abstract

Fully austenitic 15Cr–15Ni titanium modified austenitic stainless steel (alloy D9) is used as fuel clad and wrapper material in fast breeder reactors. The temperature dependence of the low cycle fatigue life of the modified alloy has been evaluated over a temperature range of300–923K employing Ti/C ratios of 4 and 8 at a fixed carbon content of 0.05%. At all temperatures the alloy exhibited cyclic hardening in both conditions. Based on the cyclic stress response and micromechanismsof deformation in the range 300–923 K, for the alloy with a Ti/C ratioof 4 threetemperature domains have been distinguished: the predynamic strain aging regime (300–673 K), the dynamic strain aging regime (673–823 K) and the regime where precipitation processes come into play (> 823 K). In both alloys the temperature dependence of fatigue lifeshowed a peakat ∼573 K, with a rapid decrease in life at higher temperatures. The alloy with a Ti/C ratio of 8 exhibited a lowcycle fatigue life that was longer than that of the alloy with a Ti/C ratio of 4 at temperatures below 748 K. At temperatures higher than 748 K, both alloys exhibitedsimilarfatigue lives. The deformation substructure developed during fatigue deformation in both alloys has been characterised and correlated with the cyclic stress response and low cycle fatigue life.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 10.1016/0142-1123(91)90482-E10.1016/0142-1123(91)90482-E ↗
2. Bhanu K. · Metall. Trans. A · 1997 · 28 · 347
3. 10.1016/0025-5416(83)90107-610.1016/0025-5416(83)90107-6 ↗
4. 10.1007/BF0266052410.1007/BF02660524 ↗
5. 10.1515/JMBM.1997.8.2.8110.1515/JMBM.1997.8.2.81 ↗
6. 10.1016/0142-1123(85)90024-610.1016/0142-1123(85)90024-6 ↗
7. Sandhya R. · Ser. Mater · 1999 · 49 · 921
8. Bhanu Sankara K. · Metall Trans. A · 1998 · 19 · 359
9. Bhanu K. · Met. Mater. Process · 1990 · 2 · 17
10. 10.1007/BF0264668410.1007/BF02646684 ↗
11. 10.1007/BF0280117310.1007/BF02801173 ↗
12. 10.1016/0001-6160(79)90130-510.1016/0001-6160(79)90130-5 ↗
13. 10.1016/0036-9748(80)90193-310.1016/0036-9748(80)90193-3 ↗
14. 10.1179/mst.1985.1.4.28510.1179/mst.1985.1.4.285 ↗
15. Abdel-Raouf H. · Metall Trans. A · 1974 · 5 · 26710.1007/BF02642951 ↗
16. 10.1016/0036-9748(76)90036-310.1016/0036-9748(76)90036-3 ↗
17. Feltner C. E. · Trans. AIME · 1968 · 242 · 1253
18. 10.1016/0036-9748(83)90383-610.1016/0036-9748(83)90383-6 ↗
19. 10.1080/1478643710821742010.1080/14786437108217420 ↗
20. 10.1016/0001-6160(89)90143-010.1016/0001-6160(89)90143-0 ↗