journal article·2011-09

Studies on influence of reheating temperature and cooling rate on structure–property behaviour of lean chemistry HSLA-100 steel

S K Dhua

Materials Science and Technology· Volume 27· Issue 9
Publisher page

Abstract

Simulation studies on the influence of reheating temperature on austenite grain coarsening in lean chemistry high strength low alloy (HSLA)-100 steel were carried out to establish optimum soaking temperature before hot rolling. Experiments carried out in ‘Gleeble-3500’ dynamic thermomechanical simulator revealed that prior austenite grain sizes varied between 26 and 98 and 34 and 126 μm after soaking at 1150, 1200 and 1250°C for 1 and 5 min respectively; a soaking temperature of 1200°C was found to be optimum. Simulation experiments on the influence of cooling rate on microstructural changes and dilatometric studies indicated lowering of transformation temperature with faster cooling. Microstructural examination of dilatometric samples confirmed martensitic transformation at faster cooling rate. The martensite structure is desirable to achieve better strength and toughness. The findings of simulation studies were subsequently used for standardising thermomechanical treatments of Nb–Cu bearing lean chemistry HSLA-100 steels. One laboratory heat of Cu bearing HSLA steel containing 0·028%Nb was made. This heat was hot rolled into 12·5 mm thick plate by varying finish rolling temperature in the range of 800–1000°C. The soaking temperature was maintained at 1200°C. The rolled plates were heat treated by both conventional reheat quenching and tempering (RQT) as well as direct quenching and tempering (DQT) techniques. Evaluation of mechanical properties revealed that plates processed through DQT route were superior to those processed through RQT route. Transmission electron microscopy revealed that martensite structure and finer interlath spacing in DQT plates resulted in superior strength and impact toughness properties as compared to RQT steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research and Development Centre for Iron and Steel Limited, Steel Authority of India Limited, Ranchi, India

References (44)

Show source-provided references
1. Tanaka T, Tabata N, Hatomura T, Shiga C:Proc. Conf. Microalloying ’75(, Korchynsky, et al.), 107–119; 1977, New York, Union Carbide Corp.
2. 10.1179/imtr.1981.26.1.18510.1179/imtr.1981.26.1.185 ↗
3. Amin RK, Pickering FB:‘Thermomechanical processing of microalloyed austenite’(, DeArdo A J, et al.), 1–30; 1982, Warrendale, PA, AIME.
4. Tanaka T: Proc. Conf. on ‘High strength low alloy steels’, (ed. , Dune D P, Chandra T, ed), 6–16; 1984, San Clemente, CA, South Coast Printers.
5. Ouchi C: Proc. Conf. on ‘High strength low alloy steels’, (ed. , Dune D P, Chandra T, ed), 17–27; 1984, San Clemente, CA, South Coast Printers.
6. Philips RH, Williams JG, Croll JE: Proc. Conf. Microalloying ’88, 235–247; 1988, Metals Park, OH, ASM International.
7. Tamura I, Ouchi C, Tanaka T, Sekine H: ‘Thermomechanical processing of high strength low alloy steels’; 1988, London, Butterworth & Co.
8. DeArdo AJ: Proc. Conf. Microalloying ’95, 15–33; 1995, Pittsburgh, PA, Iron and Steel Society.
9. Choo WY, Lee CS, Hong ST:‘Physical metallurgy of direct-quenched steels’(, Taylor K A, et al.), 71–92; 1993, Warrendale, PA, TMS.
10. 10.2355/isijinternational.35.103410.2355/isijinternational.35.1034 ↗
11. 10.1016/S0921-5093(98)00670-410.1016/S0921-5093(98)00670-4 ↗
12. 10.1007/s11661-003-0326-310.1007/s11661-003-0326-3 ↗
13. 10.1007/BF0283161610.1007/BF02831616 ↗
14. 10.2355/isijinternational1966.27.47810.2355/isijinternational1966.27.478 ↗
15. Wilson AD · J. Met. · 1987 · 29 · 36
16. 10.1007/BF0283310810.1007/BF02833108 ↗
17. Wilson AD, Hamburg EG, Colvin DJ, Thompson SW, Krauss G: Proc. Int. Conf. Microalloying ’88, 259–275; 1988, Metals Park, OH, ASM International.
18. 10.1016/S0036-9748(88)80105-410.1016/S0036-9748(88)80105-4 ↗
19. 10.1007/BF0267256410.1007/BF02672564 ↗
20. 10.2355/isijinternational.36.6110.2355/isijinternational.36.61 ↗
21. 10.1007/BF0264981510.1007/BF02649815 ↗
22. LeMay I, Krishnadev MR: in ‘Copper in iron and steel’, (ed. , LeMay I, Schetky L M, ed); 1982, New York, John Wiley & Sons.
23. Graville BA: Proc. Int. Conf. on ‘Welding of HSLA (microalloyed) structural steels’, 85–101; 1978, Metals Park, OH, ASM International.
24. Smith NJ, McGrath JT, Bowker JT, Gianetta JA:Proc. Int. Conf. on ‘The metallurgy, welding and qualification of microalloyed (HSLA) steel weldments’(, Hickey J T, et al.), 306–324; 1990, Miami, FL, AWS.
25. 10.2355/isijinternational.40.Suppl_S4910.2355/isijinternational.40.Suppl_S49 ↗
26. 10.2355/isijinternational.42.29010.2355/isijinternational.42.290 ↗
27. Czyryca EJ: ‘Key engineering materials’, Vols. 84–85, 491–520; 1993, Aedermannsdorf, Transtech Publications.10.4028/www.scientific.net/KEM.84-85.491 ↗
28. 10.1007/BF0264385410.1007/BF02643854 ↗
29. 10.1111/j.1559-3584.1990.tb02632.x10.1111/j.1559-3584.1990.tb02632.x ↗
30. Foley RP, Fine ME: Proc. Int. Cont. on ‘Processing, microstructure and properties of microalloyed and other modern HSLA steels’, 315–330; 1991, Warrendale, PA, ISS.
31. Foley RP, Fine ME: Proc. Speich Symp. 139–154; 1992, Warrendale, PA, ISS.
32. Fox AG, Mikalac S, Vassilaros MG: Proc. Speich Symp. 155–161; 1992, Warrendale, PA, ISS.
33. Lis AK, Mujahid M, Garcia CI, DeArdo AJ: Proc. Speich Symp. 29–38; 1992, Warrendale, PA, ISS.
34. 10.1361/10599499877034798110.1361/105994998770347981 ↗
35. 10.1007/s11661-001-0201-z10.1007/s11661-001-0201-z ↗
36. 10.1016/S0921-5093(01)01259-X10.1016/S0921-5093(01)01259-X ↗
37. Yoshie A, Fujioka M, Onoe Y, Okamoto K: Proc. Speich Symp. 119–127; 1992, Warrendale, PA, ISS.
38. 10.1179/174328405X2704310.1179/174328405X27043 ↗
39. 10.1016/j.msea.2009.03.05210.1016/j.msea.2009.03.052 ↗
40. Thomson SW: Proc. 40th Mechanical Working and Steel Processing Conf., Vol. 36, 663–670; 1998, Warrendale, PA, ISS.
41. 10.2355/isijinternational.44.11510.2355/isijinternational.44.115 ↗
42. 10.1179/174328406X12987810.1179/174328406X129878 ↗
43. 10.1179/irs.2001.28.5.37310.1179/irs.2001.28.5.373 ↗
44. 10.1179/174328108X31887910.1179/174328108X318879 ↗