journal article·2015-12

Temperature dependence of impact deformation behavior of single crystal Ni based superalloy

Y. H. Yang, J. J. Yu, X. F. Sun, T. Jin, H. R. Guan

Materials Science and Technology· Volume 31· Issue 15
Publisher page

Abstract

The impact test was carried out to investigate the intermediate temperature brittleness of single crystal Ni based superalloy. The samples were impacted at the velocity of ∼5 m s− 1. The results showed that the impact toughness also exhibited intermediate temperature brittleness, which is similar to the situation in tensile. The samples showed the highest impact toughness at 600°C but exhibited the lowest impact toughness at 760°C. Results showed that the variety of impact toughness was due to the deformation mechanism. At 600°C, a/2 < 110> dislocation slips on the {111} slip system were attributed to the high impact toughness; however, a/2 < 110> dislocation slips from octahedral {111} planes to cubic {100} planes resulted in significant work hardening, leading to the decrease of impact toughness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Superalloy Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China

References (31)

Show source-provided references
1. 10.1016/j.msea.2010.01.05110.1016/j.msea.2010.01.051 ↗
2. 10.1016/j.msea.2004.03.05710.1016/j.msea.2004.03.057 ↗
3. 10.1007/BF0281167510.1007/BF02811675 ↗
4. 10.1016/0025-5416(72)90072-910.1016/0025-5416(72)90072-9 ↗
5. Fiore N. F. · Rev. High Temp. Mater · 1975 · 2 · 373
6. 10.1016/j.msea.2008.02.01310.1016/j.msea.2008.02.013 ↗
7. 10.1016/S1003-6326(11)60890-X10.1016/S1003-6326(11)60890-X ↗
8. 10.1016/S0921-5093(03)00039-X10.1016/S0921-5093(03)00039-X ↗
9. 10.1016/j.msea.2008.03.04010.1016/j.msea.2008.03.040 ↗
10. 10.1016/j.matdes.2011.11.06710.1016/j.matdes.2011.11.067 ↗
11. 10.1016/j.msea.2004.03.05710.1016/j.msea.2004.03.057 ↗
12. 10.1016/j.msea.2014.11.02610.1016/j.msea.2014.11.026 ↗
13. 10.1016/S1359-6454(97)00350-910.1016/S1359-6454(97)00350-9 ↗
14. 10.1016/j.msea.2008.05.02210.1016/j.msea.2008.05.022 ↗
15. 10.1016/S0966-9795(99)00083-710.1016/S0966-9795(99)00083-7 ↗
16. 10.1016/S0921-5093(98)00945-910.1016/S0921-5093(98)00945-9 ↗
17. 10.1016/S0966-9795(97)00033-210.1016/S0966-9795(97)00033-2 ↗
18. 10.1016/j.msea.2009.08.02210.1016/j.msea.2009.08.022 ↗
19. 10.1016/j.matdes.2013.11.07510.1016/j.matdes.2013.11.075 ↗
20. 10.1016/j.msea.2009.12.03910.1016/j.msea.2009.12.039 ↗
21. 10.1016/j.jmatprotec.2007.12.04910.1016/j.jmatprotec.2007.12.049 ↗
22. 10.1016/j.msea.2008.02.01310.1016/j.msea.2008.02.013 ↗
23. 10.1063/1.216780010.1063/1.2167800 ↗
24. Dieter G. E. ‘Mechanical metallurgy’, 3rd edn; 1986, New York, McGraw-Hill.
25. 10.1016/S0167-577X(99)00028-210.1016/S0167-577X(99)00028-2 ↗
26. 10.1016/j.msea.2004.05.00110.1016/j.msea.2004.05.001 ↗
27. 10.1016/0022-5096(69)90033-710.1016/0022-5096(69)90033-7 ↗
28. 10.1016/j.msea.2010.09.05310.1016/j.msea.2010.09.053 ↗
29. 10.1080/0141861950823623310.1080/01418619508236233 ↗
30. 10.1016/S1006-706X(10)60011-810.1016/S1006-706X(10)60011-8 ↗
31. 10.1016/j.msea.2005.03.00910.1016/j.msea.2005.03.009 ↗