Infiltration diffusional solidification: a new route for processing metal matrix composites
Source abstract
Abstract
An alternative route for the production of particle reinforced MMCs by infiltration with any volume fraction of particles up to ∼50% is described. The process is based on the infiltration by a low melting temperature eutectic alloy of porous preforms prepared with a mixture of the reinforcing ceramic particles and a pure metal powder. The infiltration is done at temperatures above the eutectic and below the fusion temperature of the pure metal; Once infiltrated with the eutectic, the solidification can proceed with a planar front and it is controlled by the partition of the alloy elements between the solid powder and the melt. Experimental results show that a homogeneous spatial distribution of reinforcement particles in the MMC can be achieved, provided that the reinforcement particles are the same size as the pure metal powder.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. 10.1179/imr.1992.37.1.10110.1179/imr.1992.37.1.101 ↗
2. FILHO F. AMBROSIO · Metal. Mater. ABM · 1996 · 52 · 248
3. E. M. KIER: ‘Fabrication of cast particulate reinforced metals via pressure infiltration’, MSc thesis, Department of Materials Science and Engineering, Massachusetts Institute of Technol-ogy, 1988.
4. 10.1007/BF0282266510.1007/BF02822665 ↗
5. LANGFORD G. · J. Met · 1980 · 32 · 28