journal article·2016-12

Force response characteristics and mechanical properties of friction stir welded AA2024 sheets

L. Ji, D. W. Zuo, M. Wang

Materials Science and Technology· Volume 32· Issue 18
Publisher page

Abstract

Process force and tensile properties in friction stir welding of AA2024 sheets were studied. Results show that the forces present a periodic variation with the same periodicity which is nearly equal to the time of one tool rotation, and thus it only depends on rotation speed. With increasing welding speed the forces increase gradually, while with increasing rotation speed the forces first decrease and then increase. Joints with superior strength-ductility synergy are produced at 900 rev min −1 –300 mm min −1 and 1000 rev min −1 –350 mm min −1 . These joints experience nearly the same peak temperature and axial force. As heat input increases the failure initiates from the interface between nugget zone (NZ) and thermo-mechanically affected zone to heat-affected zone continuing to NZ.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Linyi University, Linyi 276005, China

Funding

National Natural Science Foundation of China · Funding of Jiangsu Innovation Program for Graduate Education

References (31)

Show source-provided references
1. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
2. 10.1179/174328009X41113610.1179/174328009X411136 ↗
3. Simar A., , Bréchet Y., and de Meester B., , Denquin A., , Gallais C., , Pardoen T.: ‘Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties’, Prog. Mater. Sci., 2012, 57, 95–183.
4. Balasubramanian N., , Gattu B., and Mishra R. S.: ‘Process forces during friction stir welding of aluminium alloys’, Sci. Technol. Weld. J., 2009, 14, 141–145.
5. 10.1179/136217110X1266577834842510.1179/136217110X12665778348425 ↗
6. Reynolds A. P., , Tang W., , Gnaupel-Herold T., and Prask H.: ‘Structure, properties, and residual stress of 304L stainless steel friction stir welds’, Scr. Mater., 2003, 48, 1289–1294.
7. Edwards P., and Ramulu M.: ‘Effect of process conditions on superplastic forming behaviour in Ti-6Al-4V friction stir welds’, Sci. Technol. Weld. Join., 2009, 14, 669–680.
8. Meran C., and Canyurt O. E.: ‘Friction Stir Welding of Austenitic Stainless Steels’, J. Achiev. Mater. Manuf. Eng., 2010, 43, 432–439.
9. Kumar K., and Kailas S. V.: ‘On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy’, Mater. Des., 2008, 29, 791–797.
10. Crawford R., , Cook G. E., , Strauss A. M., , Hartman D. A., and Stremler M. A.: ‘Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding’, Sci. Technol. Weld. Join., 2006, 11, 657–665.
11. 10.1179/1362171812Y.000000007710.1179/1362171812Y.0000000077 ↗
12. 10.1179/1362171812Y.000000003910.1179/1362171812Y.0000000039 ↗
13. Arora A., , De A., and DebRoy T.: ‘Towards optimum friction stir welding tool shoulder diameter’, Scr. Mater., 2011, 64, (1), 9–12.
14. Mehta M., , Arora A., , De A., and DebRoy T.: ‘Tool geometry for friction stir welding-optimum shoulder diameter’, Metall. Mater. Trans. A, 2011, 42, (9), 2716–2722.
15. 10.1179/1362171814Y.000000022110.1179/1362171814Y.0000000221 ↗
16. Manvatkar V. D., , Arora A., , De A., and DebRoy T.: ‘Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding durability maps for friction stir welding’, Sci. Technol. Weld. Join., 2012, 17, (6), 460–466.
17. Mehta M., , Chatterjee K., and De A.: ‘Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors’, Sci. Technol. Weld. Join., 2013, 18, (3), 191–197.
18. Su H., , Wu C. S., , Pittner A., and Rethmeier M.: ‘Simultaneous measurement of tool torque, traverse force and axial force in friction stir welding’, J. Manuf. Process., 2013, 15, 495–500.
19. Qian J. W., , Li J. L., , Xiong J. T., , Zhang F. S., , Li W. Y., and Lin X.: ‘Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding’, Sci. Technol. Weld. Join., 2012, 17, (4), 338–341.
20. Li W. Y., , Li J. F., , Zhang Z. H., , Gao D. L., and Chao Y.-J.: ‘Metal flow during friction stir welding of 7075-t651 aluminum alloy’, Exper. Mech., 2013, 53, 1573–1582.
21. 10.1016/S0921-5093(01)01474-510.1016/S0921-5093(01)01474-5 ↗
22. Trimble D., , O'Donnell G. E., and Monaghan J.: ‘Characterisation of tool shape and rotational speed for increased speed during friction stir welding of AA2024-T3’, J. Manuf. Process., 2015, 17, 141–150.
23. Moshwan R., , Yusof F., , Hassan M. A., and Rahmat S. M.: ‘Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy’, Mater. Des., 2015, 66, 118–128.
24. Yan J., , Sutton M. A., and Reynolds A. P.: ‘Process-structure-property relationships for nugget and heat affected zone regions of AA2524-T351 friction stir welds’, Sci. Technol. Weld. Join., 2005, 10, 725–736.
25. Arora A., , DebRoy T., and Bhadeshia H. K. D. H.: ‘Back-of-the-envelope calculations in friction stir welding-Velocities, peak temperature, torque, and hardness’, Acta Mater., 2011, 59, 2020–2028.
26. Zhang Z. H., , Li W. Y., , Li J. L., and Chao Y. J.: ‘Effective predictions of ultimate tensile strength, peak temperature and grain size of friction stir welded AA2024 alloy joints’, Int. J. Adv. Manuf. Technol., 2014, 73, 1213–1218.
27. Zhang H. J., , Liu H. J., and Yu L.: ‘Microstructure and mechanical properties as a function of rotation speed in underwater friction stir welded aluminum alloy joints’, Mater. Des., 2011, 32, 4402–4407.
28. Zhang Z. H., , Li W. Y., , Shen J. J., , Chao Y. J., , Li J. L., and Ma Y.-E.: ‘Effect of backplate diffusivity on microstructure and mechanical properties of friction stir welded joints’, Mater. Des., 2013, 50, 551–557.
29. Zhang Z. H., , Li W. Y., , Feng Y., , Li J. L., and Chao Y. J.: ‘Improving mechanical properties of friction stir welded AA2024-T3 joints by using a composite backplate’, Mater. Sci. Eng. A, 2014, 598, 312–318.
30. Zhang Z., , Xiao B. L., and Ma Z. Y.: ‘Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al–T351 joints’, Acta Mater., 2014, 73, 227–239.
31. Srivatsan T. S., , Vasudevan S., and Park L.: ‘The tensile deformation and fracture behavior of friction stir welded aluminum alloy 2024’, Mater. Sci. Eng. A, 2007, 466, 235–245.