journal article·2007-11

Statistical analysis of phosphorus segregation on intergranular fracture facets in pressure vessel steels

S. J. Wu, R. G. Ding, J. F. Knott

Materials Science and Technology· Volume 23· Issue 11
Publisher page

Abstract

A533B and C–Mn steels, widely used as nuclear pressure vessel steels, have been aged at 520°C after tempering at 650°C for various periods of time to produce different levels of embrittlement resulting from the segregation of P to grain boundaries. Metallographic observation and tensile test results showed that the embrittlement heat treatment did not have significant influence on the microstructures or tensile properties of the steels. P segregation at grain boundaries and on intergranular facets was investigated using field emission gun transmission electron microscopy and Auger electron spectroscopy. After such treatment, enhanced segregation was found to be a linear function of the square root of embrittling time. Statistical analysis of the AES measurements indicated that there is a minimum segregation level for intergranular fracture to occur.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. McLean D. ‘Grain boundaries in metals’, 118; 1957, London, Oxford University Press.
2. 10.1179/imtr.1977.22.1.26210.1179/imtr.1977.22.1.262 ↗
3. 10.1179/imtr.1978.23.1.16410.1179/imtr.1978.23.1.164 ↗
4. 10.1016/0001-6160(80)90112-110.1016/0001-6160(80)90112-1 ↗
5. 10.1179/mst.1996.12.10.81810.1179/mst.1996.12.10.818 ↗
6. 10.1016/S1359-6462(02)00151-310.1016/S1359-6462(02)00151-3 ↗
7. 10.1016/0001-6160(87)90183-010.1016/0001-6160(87)90183-0 ↗
8. Bowen P., Hippsley C. A., and Knott J. F.: Acta Metall. 1984, 32, 637–647.10.1016/0001-6160(84)90137-8 ↗
9. 10.1007/BF0270044210.1007/BF02700442 ↗
10. Ritchie R. O., Geniets L. C. E., and Knott J. F.: Proc. 3rd Int. Conf. on ‘The strength of metals’,Vol. 1, 124; 1973, Cambridge, The Institute of Metals and the Iron and Steel Institute.
11. 10.1016/0001-6160(79)90002-610.1016/0001-6160(79)90002-6 ↗
12. 10.1179/174328405X2711510.1179/174328405X27115 ↗
13. 10.1179/mst.1996.12.10.81810.1179/mst.1996.12.10.818 ↗
14. 10.1007/BF0035657310.1007/BF00356573 ↗
15. 10.1007/BF0264287710.1007/BF02642877 ↗
16. Partridge A., and Tatlock G. J.: Surf Interf Anal. 1992, 18, 713–723.10.1002/sia.740181005 ↗
17. Ding R. G. · 2003
18. 10.1002/pssa.221031025110.1002/pssa.2210310251 ↗
19. Ashby M. F. · Metall · 1978 · 3
20. Ogura T. · Acta Metall · 1978 · 26 · 131610.1016/0001-6160(78)90147-5 ↗
21. Hofmann S., Lejcek P., and Adamek J.: Surf Interf Anal. 1992, 19, 601–606.10.1002/sia.7401901112 ↗
22. 10.1016/0036-9748(81)90175-710.1016/0036-9748(81)90175-7 ↗
23. Wu S. J., and Knott J. F.: unpublished results.
24. Islam A.: Intergranular fracture in 2.25Cr 1 Mo steel at low temperature’, PhD thesis, The University of Birmingham, Birmingham, UK, 2001.
25. 10.1179/174328405X6395310.1179/174328405X63953 ↗
26. Vatter I. A., and Titchmarsh J. M.: Surf Interf Anal. 1997, 25, 760–776.10.1002/(SICI)1096-9918(199709)25:10<760::AID-SIA298>3.0.CO;2-S ↗
27. 10.1016/S1359-6462(99)00069-X10.1016/S1359-6462(99)00069-X ↗
28. Briant C. L.: in ‘Materials interface: atomic level structure and properties’, (ed. Wolf D., and Yip S.), 463; 1992, London, Chapman & Hall.
29. Fisher S. B., Spellward P., Scowen R., and Lee B.: Proc. MRS Symp., 439; 1997, Warrendale, PA, Materials Research Society.10.1557/PROC-439-533 ↗
30. 10.1007/s11661-004-0115-710.1007/s11661-004-0115-7 ↗